發布時間：2018-09-07 21:38

【摘要】：利用實驗室退火爐對冷軋低合金高強鋼進行連續退火工藝模擬,研究退火溫度對其組織與性能的影響,并通過改變鋼中Nb成分的含量,研究化學成分Nb對熱軋板性能以及對退火板性能的影響。結果表明:在790℃以下,隨著退火溫度的逐漸升高,退火板的屈服強度和抗拉強度顯著降低,伸長率顯著升高;在790℃以上,隨著退火溫度的逐漸升高,退火板的屈服強度和抗拉強度下降趨勢較小。增加鋼中Nb的含量能夠顯著提高熱軋板和退火板的強度,增加0.01%的Nb大約能使熱軋板的抗拉強度提高34 MPa,退火板屈服強度提高14 MPa。
[Abstract]:The continuous annealing process of cold rolled low alloy high strength steel was simulated by laboratory annealing furnace. The effect of annealing temperature on the microstructure and properties of the steel was studied, and the content of Nb in the steel was changed. The effects of chemical composition Nb on the properties of hot rolled sheet and annealed plate were studied. The results show that under 790 鈩，

本文編號：2229492