【摘要】：采用Anycasting軟件對A356合金鑄件半固態擠壓鑄造過程中充型和凝固過程進行數值模擬。研究了壓射速度、澆注溫度對半固態A356鋁合金擠壓鑄造過程的影響,對工藝參數進行了優化,并對壓鑄模具進行了改進。結果表明,模具預熱溫度為200℃,澆注溫度為600℃,壓射速度為0.5m/s,內澆口厚度為5mm時,能夠獲得質量理想的鑄件。
[Abstract]:The mold filling and solidification process of A356 alloy casting during semi solid squeeze casting were simulated by Anycasting software. The effects of injection speed and pouring temperature on the extrusion casting process of semi-solid A356 aluminum alloy were studied. The process parameters were optimized and the die casting die was improved. The results show that when the preheating temperature is 200 鈩，

本文編號：2219709