【摘要】：測試了耐磨合金鑄鐵經過不同工藝熱處理前后的硬度。結果表明:耐磨合金鑄鐵經950~1050℃×0.5 h油冷、空冷和爐冷3種方式冷卻后,其硬度值分別為58~60 HRC、43~44 HRC和33~35 HRC,且加熱溫度低于600℃時,其硬度變化不大。
[Abstract]:The hardness of wear-resistant alloy cast iron before and after heat treatment was tested. The results show that the hardness of wear-resistant alloy cast iron is 5860 HRC 43444 HRC and 333H 35HRC after oil cooling, air cooling and furnace cooling at 950U 1050 鈩，

本文編號：2194772