【摘要】：以管割刀片用的Cr12Mo1V1鋼為研究對象,分析不同的鍛壓工藝對其硬度、沖擊韌性的影響,并使用OM、XRD、SEM分析不同工藝下的微觀組織。研究結果表明:相比于直接空冷淬火,鍛后空冷的峰值硬度向右偏移,在1100℃時達到峰值887 HV;隨著鍛壓溫度升高,650℃回火沖擊韌性呈現下降趨勢,馬氏體轉變量減少,殘余奧氏體量增加;鍛后空冷碳化物主要為M7C3型。綜合分析表明,鍛壓溫度為1100~1160℃時,鍛壓刀片能夠得到較好的組織和性能。
[Abstract]:The influence of different forging processes on hardness and impact toughness of Cr12Mo1V1 steel used for pipe cutting blade was studied. The results show that compared with direct air-cooling quenching, the peak hardness of air cooling after forging deviates to the right and reaches the peak value at 1100 鈩，

本文編號：2187584