【摘要】：使用超聲波檢測技術對直徑ф350mm的5083圓棒進行探傷并對缺陷進行定位。采用光學顯微鏡、掃描電鏡、能譜儀對缺陷進行了分析。這些缺陷通常為粗大金屬間化合物(Al_7Cr)。這些缺陷產生的原因主要與鑄造過程的鑄造溫度、鑄造液面不穩定相關。同時,本文提出了控制5083合金金屬間化合物的一些措施,有效地降低了金屬間夾雜的形成。
[Abstract]:Ultrasonic testing technique is used to detect the 5083 round rod of 350mm diameter and to locate the defect. The defects were analyzed by optical microscope, scanning electron microscope and energy spectrometer. These defects are usually coarse intermetallic compounds (Al_7Cr). The causes of these defects are mainly related to casting temperature and liquid level instability. At the same time, some measures to control the intermetallic compounds of 5083 alloy are put forward, which can effectively reduce the formation of intermetallic inclusions.
【作者單位】： 廣西南南鋁加工有限公司;廣西航空航天鋁合金材料與加工研究院;
【基金】：廣西自治區科學研究與技術開發計劃項目(桂科合15104001-4) 國家國際科技合作專項項目(2014DFA50210)
【分類號】：TG115.28;TG245

【相似文獻】

相關期刊論文 前10條

1 于o，

本文編號：2175597