【摘要】：采用光學顯微鏡、掃描電鏡、X射線衍射儀等分析了在冷軋及退火過程中不同工序段普通取向硅鋼的組織和織構演變情況。結果表明:一次冷軋并經850℃×6min脫碳退火后,取向硅鋼發生一次再結晶,晶粒由纖維狀轉變?yōu)榈容S狀,平均晶粒尺寸為25μm,織構主要有{001}〈010〉、{111}〈112〉和Goss織構等;在二次冷軋后,晶粒明顯變小,且再次轉變?yōu)槔w維狀,織構主要為α織構和γ織構;經1 170℃高溫退火后,取向硅鋼發生二次再結晶,一次再結晶晶粒異常長大,晶粒尺寸達到厘米級;拉伸平整退火后,晶粒更為圓整均勻,平均晶粒尺寸為2.28cm,Goss織構取向密度最大,達到24。
[Abstract]:The microstructure and texture evolution of common oriented silicon steel during cold rolling and annealing were analyzed by means of optical microscope, scanning electron microscope and X-ray diffractometer. The results show that after cold rolling and annealing at 850 鈩，

本文編號：2170485