本文關鍵詞：低壓鑄造充型過程水模擬速度場可視化技術，由筆耕文化傳播整理發布。

 在分類學科中查詢

所有學科

金屬學及金屬工藝

鑄造充型過程

     Numerical Simulation of Flow Field for Low Pressure Casting Filling Process

     低壓鑄造充型過程流場計算數值模擬

短句來源

     The FEM-MAC Method Numerical Simerical Simulation of Casting Filling Process

     鑄造充型過程的FEM-MAC法數值模擬

短句來源

     Intelligent Selection of Parameters in Casting Filling Process

     鑄造充型過程控制參數的智能選擇

短句來源

     Comparison Between Two Optimal Selections of Parameters in Casting Filling Process

     鑄造充型過程參數優選的兩種方法比較

短句來源

     Computer Video Technology for Velocity Field of Hydraulic Simulation in Low-pressure Casting Filling Process

     低壓鑄造充型過程水模擬速度場可視化技術

短句來源

     Progress Status of EPC Mould Filling Process Numerical Simulation in China and Abroad

     消失模鑄造充型過程數值模擬的國內外研究現狀

短句來源

     Research on Numerical Simulation of Mould Filling Process of Lost Foam Casting

     消失模鑄造充型過程數值模擬研究

短句來源

     In this paper, the CAE system of the LFC was developed based on the characteristics of the mould filling process, using the numerical techniques.

     本文根據消失模鑄造技術的特點,對消失模的充型過程進行系統分析,并結合數值求解方法,開發出消失模鑄造充型過程的CAE 軟件系統。

短句來源

     The resistance simulation method is one for displaying the mould filling process,which is based on principle of reducing the resistance value of resistance wire mounted in the mould when submerged by molten metal,and then of utilizing automatic calibration,gather and data processing.

     電阻模擬法是利用設置在型腔內的電阻絲被澆注的導電金屬液逐漸淹沒，其電阻值降低的原理，通過計算機自動標定、采集和處理數據，并顯示鑄造充型過程的方法。

短句來源

     The numerical simulation technique of mould filling process is a frontal technique of foundry technology.

     鑄造充型過程的數值模擬技術是鑄造領域的前沿技術。

短句來源

     Study on mold filling in AZ91 alloy LFC process

     AZ91合金消失模鑄造充型過程研究

短句來源

     Influences of flow field and temperature field on solidification were analyzed in the filling process of semi-continuous casting of the aluminum slab.

     分析了鋁板坯半連續鑄造充型過程中流場和溫度場對凝固的影響,得到了流場、溫度場的分布圖和充型過程中自由表面的位置和形狀圖。

短句來源

     The numerical simulation of solidification processes were done under flow field and temperature field by using CFD commercial code Flow-3d.

     利用CFD商用軟件Flow-3d對鋁板坯半連續鑄造充型過程中流場與溫度場耦合作用下的凝固過程進行了數值模擬。

短句來源

     Water Simulation Test of Flow Field During Mold Filling for 495A Diesel Engine Block Casting

     495A柴油機缸體鑄造充型過程流動場水力模擬試驗

短句來源

     Finite Element Simulation for Filling Process of Engine Block Casting

     柴油機機體鑄造充型過程有限元模擬

短句來源

更多       

查詢“鑄造充型過程”譯詞為用戶自定義的雙語例句
    我想查看譯文中含有：的雙語例句

為了更好的幫助您理解掌握查詢詞或其譯詞在地道英語中的實際用法，我們?yōu)槟鷾?zhǔn)備了出自英文原文的大量英語例句，供您參考。

  mould filling process

The mould filling process was recorded using a 16 mm high-speed camera.

The functional relations relations among the variations in the process of the mold-filling in low pressure casting are deduced on the basis of a theory. According to the theory, a simpler and more reliable method is suggested.

本文從理論上推導出低壓鑄造充型過程中各種量之間的關系并根據這一理論提出了更簡單更可靠的控制方式。

In the present paper,the relationship among Various pressure casting is analysised theoret- ically and verified by experiments.This work provides a guideline for the design of differential pressure casting equipments.

本文從理論上論證了差壓鑄造充型過程中各種量之間的關系,并得到實際驗證。它為設計各種差壓鑄造設備提供了指導性的依據。

Real-time observation and movement analyzation of the mould filling under low pressure were conducted by means of high speed photography and film processing technology.The results show that the dynamic character of the mould filling under low pressure casting can be described by second order nonliear differential equation.

利用高速攝影和影片運動分析技術,在透明模型上對低壓鑄造充型過程進行了實時觀察和運動分析。結果表明:低壓鑄造充型的動力學特征可用二階非線性微分方程描述。

  本文關鍵詞：低壓鑄造充型過程水模擬速度場可視化技術，由筆耕文化傳播整理發布。