本文選題：中碳硅錳鋼 + 連續冷卻相變��； 參考：《鋼鐵》2017年12期

【摘要】：為了探索含銅中碳硅錳鋼連續冷卻轉變過程中的相變規律,采用DIL805L型膨脹儀研究了銅對中碳硅錳鋼連續冷卻過程中顯微組織和硬度的影響,借助高分辨透射電鏡研究了連續冷卻過程中含銅相的析出行為。結果表明,在中碳硅錳鋼的連續冷卻過程中,銅的加入使得鐵素體轉變的孕育期延長,且降低貝氏體和馬氏體開始轉變溫度。富銅顆粒在鐵素體中彌散析出,細化連續相變組織。冷卻速度小于21℃/s時,含銅中碳硅錳鋼由于富銅顆粒析出以及貝氏體和馬氏體組織增加引起顯微硬度增加。當冷卻速度大于21℃/s時,銅反而會降低鋼中貝氏體和馬氏體組織的顯微硬度。
[Abstract]:In order to explore the transformation law of carbon silicon-manganese steel during continuous cooling transformation, the effect of copper on microstructure and hardness of medium carbon silicon-manganese steel during continuous cooling was studied by DIL805L expansion instrument. The precipitation behavior of copper-bearing phases during continuous cooling was studied by means of high resolution transmission electron microscopy. The results show that the incubation period of ferrite transformation is prolonged and the transformation temperature of bainite and martensite is decreased with the addition of copper during the continuous cooling of medium carbon silicon-manganese steel. The copper-rich particles dispersed in ferrite and refined the structure of continuous phase transformation. When the cooling rate is less than 21 鈩，

本文編號：1865664