本文選題：鋁合金 + 雙級時效��； 參考：《金屬熱處理》2017年06期

【摘要】：采用力學性能測試、電導率測試、晶間腐蝕試驗以及金相顯微鏡觀察等方法,研究了雙級時效處理對7050鋁合金擠壓棒材力學性能及耐腐性能的影響。結果表明:隨著雙級時效時間的延長,鋁合金的強度、硬度降低,導電率值逐漸增加,同時合金的應力腐蝕敏感性不斷降低。當采用雙級固溶450℃×1.5 h+495℃×1 h,雙級時效120℃×8 h+160℃×8 h熱處理制度處理時,7050鋁合金的抗拉強度、伸長率和導電率分別為689.4 MPa、12.72%、35.03%IACS,腐蝕等級3級,綜合性能最佳。
[Abstract]:The effects of two-stage aging treatment on the mechanical properties and corrosion resistance of 7050 aluminum alloy extruded bar were studied by means of mechanical property test, electrical conductivity test, intergranular corrosion test and metallographic microscope observation. The results show that the strength and hardness of aluminum alloy decrease with the increase of two-stage aging time, the conductivity increases gradually, and the stress corrosion sensitivity of the alloy decreases. The tensile strength, elongation and conductivity of the aluminum alloy were 689.4 MPA, 12.72 and 35.03 IACSs respectively, and the comprehensive properties were the best when the two-stage solution was treated with 450 鈩，

本文編號：1827746