本文選題：抗菌功能 + 表面改性��； 參考：《Transactions of Nonferrous Metals Society of China》2017年09期

【摘要】：采用冷凍鑄造和熱氧化法制備一種新型兼具抗菌功能和良好骨整合性能的表面改性仿生多孔鈦植入體。通過細胞增殖實驗、堿性磷酸酶(AKP)活性水平測定實驗、X線檢測及骨硬組織切片等體內外成骨實驗方法評價多孔鈦植入體的骨整合性能。結果顯示,隨著植入體與體外細胞共培養時間的延長,表面納米改性后多孔鈦實驗組的體外細胞增殖、分化活性水平較未表面納米改性的多孔鈦和致密鈦對照組明顯升高(P0.05);隨著在動物體內植入時間的延長,處理和未處理多孔鈦實驗組孔隙中有骨長入和成骨現象,而且成骨細胞在處理組孔隙中分化程度更加成熟�？咕律嗫租佒踩塍w能與骨組織形成牢固的生物性骨嵌合,具有良好的骨整合性能。
[Abstract]:A new surface modified porous titanium implant with antibacterial function and good bone integration was prepared by freezing casting and thermal oxidation. The bone integration of porous titanium implants was evaluated by cell proliferation assay, alkaline phosphatase (ALP) activity test, X-ray examination and osteogenesis in vitro and in vivo. The results showed that with the prolongation of the co-culture time between the implant and the cells in vitro, the proliferation of porous titanium cells was observed in vitro. The differentiation activity level of porous titanium and dense titanium group was significantly higher than that of porous titanium and compact titanium group, and with the prolongation of implantation time in animals, bone growth and osteogenesis were observed in porous and untreated porous titanium experimental groups. Moreover, the differentiation of osteoblasts in the pores of the treatment group was more mature. Antibacterial biomimetic porous titanium implants are capable of forming a solid biological bone chimera with bone tissue and have good bone integration performance.
【作者單位】： 中南大學湘雅三醫院;中南大學粉末冶金國家重點實驗室;
【基金】：Projects (51290295,51305464) supported by the National Natural Science Foundation of China Project (2016JJ6156) supported by the Natural Science Foundation of Hunan Province,China Project (2016JC2064) supported by Key Research and Development Project of Hunan Province,China Project (20130162120094) supported by Specialized Research Fund for the Doctoral Program of Higher Education,China
【分類號】：R318.08;TG146.23

【相似文獻】

相關博士學位論文 前3條

1 張國慶;激光選區熔化成型植入體優化設計及應用基礎研究[D];華南理工大學;2016年

2 肖冬明;面向植入體的多孔結構建模及激光選區熔化直接制造研究[D];華南理工大學;2013年

3 陳躍軍;三維分級多孔鈦植入體的制備及性能研究[D];西南交通大學;2009年

相關碩士學位論文 前2條

1 王滕;鈦合金植入體微納雙級結構表面設計制造及其生物相容性研究[D];山東大學;2017年

2 葉梓恒;Ti6Al4V脛骨植入體個性化設計及其激光選區熔化制造工藝研究[D];華南理工大學;2014年

，

本文編號：1785139