發布時間：2018-04-20 16:01

  本文選題：聚晶立方氮化硼 + 高鎳鉻鑄鋼��； 參考：《機械工程材料》2017年12期

【摘要】：以鋁鈦化合物為黏結劑,制備了立方氮化硼體積分?jǐn)?shù)為80%的聚晶立方氮化硼刀片,研究了其顯微組織、硬度、磨損性能和切削加工性能,并與同類產品進行了對比。結果表明:所制刀片的顯微硬度達到3 127 HV,顯微組織分布均勻,后刀面磨損高度為0.28 mm,與同類產品的相當;斷續切削時達到3.2萬次沖擊不崩刃,優于同類產品;在粗加工時,該刀片切削軋輥數量比同類產品的高出23%以上,在精加工時其單刃切削行程高出17%以上。
[Abstract]:Polycrystalline cubic boron nitride inserts with 80% cubic boron nitride were prepared by using aluminum and titanium compounds as binders. The microstructure, hardness, wear properties and cutting and processing properties of polycrystalline cubic boron nitride inserts were studied and compared with similar products. The results show that the microhardness of the blade is 3 127HVV, the microstructure of the blade is uniform, the wear height of the rear face is 0.28mm, which is equivalent to that of the similar products, and the impact of intermittent cutting is 32000 times, which is superior to that of the similar products. The number of cutting rollers of this blade is more than 23% higher than that of the similar products, and the cutting stroke of single blade is more than 17% higher than that of the same product during finishing.
【作者單位】： 周口師范學院機械與電氣工程學院;開封貝斯科超硬材料有限公司;河南黃河旋風股份有限公司;
【基金】：國家自然科學基金資助項目(11405280) 河南省科技廳科技發展計劃項目(162102310592) 周口師范學院校本項目(ZKNUB3201609)
【分類號】：TG333.17

【相似文獻】

相關期刊論文 前10條

1 明之;;用聚晶立方氮化硼刀具進行加工[J];工具技術;1989年05期

2 周曉莉;;聚晶立方氮化硼陶瓷復合刀具加工淬火鋼[J];機械制造;1991年07期

3 屠厚澤;聚晶立方氮化硼切削刀具的研究現狀及其發展[J];探礦工程(巖土鉆掘工程);1995年02期

4 劉一波，屠厚澤，，陳慶壽;聚晶立方氮化硼刀具及其制造技術綜述[J];地質與勘探;1996年04期

5 肖嫻;超硬工具材料在日本的應用[J];工具技術;1992年05期

6 張鵬;聚晶立方氮化硼刀具加工砂輪模具的新工藝[J];機械;1995年01期

7 ;海外科技[J];機電工程技術;2009年09期

8 張?jiān)鲋?張利梅,白兵占,李文龍;聚晶立方氮化硼刀具切削高錳鋼的磨損機制[J];摩擦學學報;2004年03期

9 李玉標;李Z

本文編號：1778449