發布時間：2018-02-21 06:26

  本文關鍵詞： 同步器齒環 熱精鍛 粒子群算法 Kriging模型　出處：《鍛壓技術》2017年02期 　論文類型：期刊論文

【摘要】：為提高同步器齒環熱精鍛成形的材料利用率,以初始溫度、壓制速度、摩擦系數、坯料內徑和坯料高度作為設計變量,以充填性、成形缺陷和材料利用率3個指標的綜合加權評分值作為優化目標,建立工藝參數與綜合加權評分值的Kriging模型。應用Kriging模型結合粒子群算法,在可行變量空間內尋優,得到最優工藝參數組合為:T=697.5℃,v=190 mm·s-1,m=0.43,d=62.75 mm,h=12.5 mm。采用最優工藝參數組合進行工藝實驗,鍛件充填飽滿,未見折疊缺陷,材料利用率提高至60.52%,為同類型的薄壁環型類鍛件工藝參數設計及優化提供了定量的確定方法和依據。
[Abstract]:In order to improve the material utilization rate of hot precision forging of synchronizer ring, the initial temperature, pressing speed, friction coefficient, inner diameter of blank and height of blank are used as design variables to fill. The Kriging model of the process parameters and the comprehensive weighted scoring values is established by using the synthetic weighted scoring values of the three indexes of forming defects and material utilization as the optimization objective. The Kriging model combined with particle swarm optimization algorithm is used to find the optimum in the feasible variable space. The optimum technological parameters were obtained as follows: 1: TX 697.5 鈩，

本文編號：1521258