本文關鍵詞： 鎂合金 熱處理 組織性能　出處：《世界有色金屬》2016年23期 　論文類型：期刊論文

【摘要】：本文將對一種Mg-Al-Zn-Mn系鎂合金進行熱處理實驗,對實驗結果進行這種合金的組織和性能關系研究,通過對這種鎂合金熱處理后產生的最優化成分進行統計,體現為選擇Mg-8Al-0.5Zn-0.2Mn的成分含量時候,這種合金的性能將達到最優的情況。實驗中利用T6工藝進行熱處理,抗拉強度為270MPa,屈服強度數值160MPa,可以達到的伸長率高達3.78%。
[Abstract]:In this paper, a kind of magnesium alloy based on Mg-Al-Zn-Mn is studied by heat treatment. The relationship between microstructure and properties of the alloy is studied, and the optimum composition of the alloy after heat treatment is analyzed. When the composition content of Mg-8Al-0.5Zn-0.2Mn is selected, the properties of the alloy will reach the optimum condition. In the experiment, the tensile strength is 270 MPA and the yield strength value is 160 MPA, and the elongation of the alloy is as high as 3.78 when the T6 process is used to heat treat the alloy with tensile strength of 270 MPA and yield strength value of 160 MPA.
【作者單位】： 銅陵有色金神耐磨材料有限責任公司;
【分類號】：TG146.22;TG166.4
，

本文編號：1503072