本文關鍵詞： 包頭稀土研究院 半連續 稀土鎂合金 鎂合金鑄造 棒材 鑄造缺陷 斷面形狀 錠坯 中試 工藝開發　出處：《特種鑄造及有色合金》2017年11期 　論文類型：期刊論文

【摘要】：正近日,包頭稀土研究院中試基地稀土鎂合金中試線完成鎂合金半連續熔鑄系統的調試生產,制備出鐖300mm×4000 mm的鎂合金棒材。對其機械加工后進行的超聲無損檢測顯示,合金鑄棒無鑄造缺陷,符合對應產品質量要求,下一步將進行大尺寸稀土鎂合金棒材的產業化制備工藝開發。鎂合金半連續鑄造技術是將鎂合金液經過結晶器凝結成殼后從下方拉出噴水冷卻成具有一定斷面形狀和一定長度的鑄坯的過程。半連續鑄造生產的錠坯具有晶粒細小、
[Abstract]:Recently, Baotou rare Earth Research Institute pilot-scale base rare earth magnesium alloy pilot line completed magnesium alloy semi-continuous casting system commissioning and production. Magnesium alloy bars of 300mm 脳 4000mm were prepared. Ultrasonic nondestructive testing of the alloy bars after machining showed that the cast bars had no casting defects, which met the quality requirements of the corresponding products. The next step will be to develop the industrialized preparation process of large-size rare earth magnesium alloy bars. The semi-continuous casting technology of magnesium alloy is that the magnesium alloy liquid is condensed through the crystallizer and then cooled by water spray from the bottom to have a certain section shape. The process of forming and producing a certain length of billet. The ingot produced by semi-continuous casting has fine grains.
【作者單位】： 包頭稀土研究院;
【分類號】：TG292
【正文快照】： j，

本文編號：1447496