本文關鍵詞：制備工藝對石油套管組織和強韌性的影響　出處：《材料熱處理學報》2017年04期 　論文類型：期刊論文

  更多相關文章： 石油套管 雙介質淬火 下貝氏體/馬氏復相組織 強韌性

【摘要】：將25Mn V石油套管用鋼通過直接淬水與水冷→空冷→水冷的雙介質淬火冷卻工藝分別處理成全馬氏體組織與下貝氏體/馬氏體復相組織,對比研究了不同淬火工藝下的微觀組織特征及回火工藝參數對試驗鋼強韌性的影響。結果表明:雙介質淬火所得下貝氏體/馬氏體復相組織具有明顯的強韌化效果,可以降低應力集中,有利于材料韌性的改善和阻止微裂紋的產生與擴展;力學性能測試表明,試驗鋼大約在400℃左右出現韌性低谷,呈現出低溫回火脆性的特征,因此,該復相組織適合于在高溫回火狀態下使用,此時復相組織提高材料韌性的作用更為顯著。
[Abstract]:Direct quenching and Water cooling of 25mn V Steel for Petroleum casing. 鈫扐ir cooling. 鈫扵he water-cooled double medium quenching cooling process is used to deal with the microstructure of complete martensite and lower bainite / martensite respectively. The effects of microstructure and tempering parameters on the strength and toughness of the steel under different quenching conditions were studied. The duplex microstructure of lower bainite / martensite obtained by double medium quenching has obvious strengthening and toughening effect. It can reduce the stress concentration, improve the toughness of materials and prevent the generation and propagation of microcracks. The mechanical properties of the steel show that the ductile valley occurs at about 400 鈩，

本文編號：1429141