The flow of pseudoplastic power-law fluids with different flow indexes at a microchannel plate was studied using computational fluid dynamic simulation.The velocity distribution along the microchannel plate and especially in the microchannel slits,flow pattern along the outlet arc and the pressure drop through the whole of microchannel plate were investigated at different power-law flow indexes.The results showed that the velocity profile in the microchannel slits for low flow index fluids was s... 

【文章來源】：Chinese Journal of Chemical Engineering. 2017,25(10)EISCICSCD

【文章頁數(shù)】：9 頁

【文章目錄】：
1. Introduction
2. Governing Equations
3. Results and Discussion
    3.1. Velocity distribution along the microchannel plate
    3.2. Velocity profile in one microchannel slit
    3.3. Velocity distribution at the outlets
    3.4. Pressure drop
    3.5. Heat transfer
4. Conclusions


【參考文獻】：
期刊論文
[1]Optimal design for split-and-recombine-type flow distributors of microreactors based on blockage detection[J]. Lin Wang,Xianzuo Kong,Yongsheng Qi.  Chinese Journal of Chemical Engineering. 2016(07)
[2]Microfluidic technology for multiphase emulsions morphology adjustment and functional materials preparation[J]. Xuehui Ge,Hong Zhao,Tao Wang,Jian Chen,Jianhong Xu,Guangsheng Luo.  Chinese Journal of Chemical Engineering. 2016(06)
[3]Kinetic study on selective extraction of HCl and H3PO4 in a microfluidic device[J]. Fang Zhao,Yangcheng Lu,Kai Wang,Guangsheng Luo.  Chinese Journal of Chemical Engineering. 2016(02)
[4]微通道內(nèi)表面單孔的空心硅鋁復(fù)合微球的制備（英文）[J]. 王晉媛,王玉軍,駱廣生.  Chinese Journal of Chemical Engineering. 2014(Z1)



本文編號：3520940