【摘要】：為了充分利用鋁鉻渣資源,并提高銅冶煉爐用鋁鉻材料的性能,以鋁鉻渣制備的鉻剛玉、鉻精礦細粉、部分穩定氧化鋯微粉、Cr_2O_3粉和α-Al_2O_3微粉為主要原料,以磷酸二氫鋁為結合劑,研究了鉻精礦細粉添加量(加入質量分?jǐn)?shù)分別為10%、15%、20%、25%和29%)對試樣經1 600℃保溫3 h燒后的顯微結構、物相組成、常溫性能及抗渣性能的影響。結果表明:隨著鉻精礦細粉加入量的增加,試樣的致密度增大,常溫力學性能呈現先增加后降低的趨勢;鉻精礦的加入增加了試樣中的鉻含量,從而提高了鋁鉻固溶體的含量,在爐襯和熔渣接觸面上生成的高熔點鐵鉻尖晶石或鐵鋁尖晶石,黏附在爐襯上形成保護層,提高鉻剛玉磚的抗渣性能。加入25%(w)鉻精礦時,試樣的綜合性能最佳。
[Abstract]:In order to make full use of aluminum-chromium slag resources and improve the properties of aluminum-chromium material for copper smelting furnace, the main raw materials were chromium corundum, chromium concentrate powder, partially stabilized zirconia powder, Cr_2O_3 powder and 偽 Al_2O_3 powder. With aluminum dihydrogen phosphate as binder, the microstructure and phase composition of chromium concentrate fine powder (10 15 1520% 25% and 29% by mass fraction respectively) after 3 h heat preservation at 1 600 鈩，

本文編號：2396631