【摘要】：結合某工程實例,采用FLUENT軟件對流化床車間生產單元?dú)錃庑孤┤紵�、硅烷泄漏燃燒時的火焰溫度和熱輻射進行模擬分析,確定影響火災的相關因素,并使用TNT當量法分析可燃?xì)怏w泄漏后車間的爆炸危險性。結果表明,泄漏孔徑對火災范圍影響重大;環境風速能降低硅烷火焰溫度;爆炸破壞半徑隨時間和泄漏孔徑的增加呈現非線性增長。
[Abstract]:Combined with an engineering example, the flame temperature and thermal radiation of hydrogen leakage combustion and silane leakage combustion in fluidized bed workshop production unit were simulated and analyzed by using FLUENT software, and the relevant factors affecting the fire were determined. The TNT equivalent method is used to analyze the explosion hazard of the workshop after the flammable gas leakage. The results show that the leakage aperture has a great influence on the fire range, the ambient wind speed can reduce the flame temperature of silane, and the radius of explosion damage increases nonlinear with the increase of time and leak aperture.
【作者單位】： 西安建筑科技大學;
【分類號】：TQ086;TQ127.2
，

本文編號：2278934