【摘要】：瓷磚的拋光質量主要受拋光磨頭運動特性的影響,為提高其拋光質量、降低碎磚率,建立拋光磨頭的整體模型并進行虛擬裝配,通過ADAMS軟件對拋光磨頭虛擬樣機進行了動態特性仿真分析,得出其運動特性變化曲線。結果表明,主、從動擺桿運動特性相似。綜合磨頭轉速與磨塊動態特性之間的定性關系,給出最佳磨頭轉速范圍。仿真分析結果為研究拋光磨頭的動態響應和振動抑制提供了有益的參考。
[Abstract]:The polishing quality of ceramic tile is mainly affected by the movement characteristic of polishing grinding head. In order to improve the polishing quality and reduce the broken tile rate, the whole model of polishing grinding head is established and virtual assembly is carried out. The dynamic characteristics of polishing grinding head virtual prototype were simulated and analyzed by ADAMS software, and the change curve of its motion characteristics was obtained. The results show that the kinematic characteristics of the principal and follower pendulum bars are similar. Based on the qualitative relationship between the grinding head speed and the dynamic characteristics of the grinding block, the optimum range of the grinding head speed is given. The simulation results provide a useful reference for studying the dynamic response and vibration suppression of polishing abrasives.
【作者單位】： 安徽理工大學機械工程學院;
【基金】：國家自然科學基金(51405004)
【分類號】：TQ174.6

【相似文獻】

相關期刊論文 前4條

1 陳金琨;楊思一;趙婷婷;;變頻液壓屑餅機動態特性仿真研究[J];鍛壓技術;2010年04期

2 焦黎棟;廉自生;;液壓支架大流量安全閥動態特性仿真[J];機械工程與自動化;2010年05期

3 王慧,隗金文,程衛東;液壓支架抗沖擊立柱的動態特性仿真[J];阜新礦業學院學報(自然科學版);1997年01期

4 ;[J];;年期

，

本文編號：2256782