【摘要】：采用SEM-EDS對九江石化生活污水和煉油污水回用系統中MBR裝置中被污染超濾膜的分析,并對被污染MBR膜性能恢復分別進行了清洗劑種類、清洗劑濃度和清洗工藝進行優化。結果表明:MBR膜面的主要污染物為Fe(OH)_3、Cu(OH)_2、Al(OH)_3和少量膠體Si污染;pH=1的檸檬酸、草酸+EDTA、鹽酸清洗MBR膜通量分別為80%、86.4%和90%;采用pH=13的碳酸鈉、次氯酸鈉+氫氧化鈉和氫氧化鈉清洗被污染MBR膜通量恢復率分別為84.53%、90.23%和94.42%;p H=1的草酸+EDTA和p H=13的Na OH進行交替清洗后的膜通量可恢復到初始通量的91.88%。
[Abstract]:SEM-EDS was used to analyze the contaminated ultrafiltration membrane in the MBR plant of domestic sewage and refinery sewage reuse system of Jiujiang Petrochemical Company. The performance recovery of contaminated MBR membrane was optimized by cleaning agent type, concentration of cleaning agent and cleaning process, respectively. The results showed that the main pollutants on the membrane surface of Fe (OH) were Fe (OH) _ 3Cu (OH) _ 2AL (OH) _ 3 and a small amount of colloidal Si contaminated citric acid, oxalic acid and hydrochloric acid cleaning MBR membrane flux were 80 ~ 86.4% and 90%, respectively. The membrane flux recovery rates of sodium hypochlorite sodium hydroxide and sodium hydroxide cleaning contaminated MBR membrane were 90.23% and 94.42% respectively. The membrane fluxes of EDTA oxalate and NaOH of pH 13 could be recovered to 91.88% of the initial flux after alternate cleaning of sodium hypochlorite sodium hydroxide (NaOH) and sodium hydroxide (NaOH).
【作者單位】： 中國石油化工股份有限公司九江分公司機動處;
【基金】：中國石油化工股份有限公司資助項目(G6001-15-14ZS0414)
【分類號】：TQ051.893

【相似文獻】

相關期刊論文 前1條

1 朱恭信;;造氣和生活污水綜合治理[J];化肥工業;1992年02期

，

本文編號：2184972