本文選題：波節管換熱器 + Microsoft�。� 參考：《燕山大學》2015年碩士論文

【摘要】：波節管換熱器是能顯著改善換熱器傳熱性能的新型換熱器,以其優秀的傳熱性能備受換熱器設計者青睞。傳統換熱器手工計算,尤其是換熱器的傳熱計算,包括傳熱系數計算、傳熱面積計算和校核計算是一項耗時耗力的復雜過程,而且人工計算容易失誤。對傳統換熱器的設計,已有多款不同的設計軟件,但有關波節管換熱器傳熱軟件的研制,目前尚未見報道。本文詳細介紹了波節管換熱器傳熱設計的基本原理和傳熱軟件研發的一般步驟,用Microsoft Visual Studio 2010編程軟件,結合波節管換熱器的工藝設計方法,研究開發了波節管換熱器傳熱計算軟件系統。將波節管換熱器的設計計算由人機對話來實現,主要包括換熱系數、換熱面積、校核和布管設計等幾項工作。結果表明,利用此軟件省略了繁雜的手工計算,使波節型換熱器的設計快速準確,應用方便。同時,本軟件研發過程中,將水-水傳熱模式和汽-水傳熱模式集成在同一軟件中,設計了波節管換熱器無相變傳熱和有相變傳熱兩種傳熱形式,擴大了軟件的使用范圍。本軟件在研發過程中設置了一些實用的查詢窗口,包括管材導熱系數查詢窗口、波節管中心距查詢窗口等。比如程序設計中的布管窗口,將復雜的布管繪圖以程序中的GDI繪圖方法繪制在熒屏上,節省了設計者的結構設計時間。程序中的表格和計算書兩種導出形式也為設計者的后續設計提供了方便。
[Abstract]:The corrugated tube heat exchanger is a new type of heat exchanger which can improve the heat transfer performance of the heat exchanger significantly. It is favored by the heat exchanger designers for its excellent heat transfer performance. Manual calculation of heat exchanger, especially heat transfer calculation of heat exchanger, including heat transfer coefficient calculation, heat transfer area calculation and check calculation, is a time-consuming and labor-consuming complex process, and manual calculation is easy to make mistakes. There are many different design software for traditional heat exchanger, but the development of heat transfer software for corrugated tube heat exchanger has not been reported. This paper introduces in detail the basic principle of heat transfer design of corrugated tube heat exchanger and the general steps of the development of heat transfer software, using Microsoft Visual Studio 2010 programming software, combined with the process design method of the corrugated tube heat exchanger. A software system for heat transfer calculation of corrugated tube heat exchanger is developed. The design and calculation of corrugated tube heat exchanger are realized by man-machine dialogue, including heat transfer coefficient, heat transfer area, check and pipe layout design, etc. The results show that the complicated manual calculation is omitted by this software, which makes the design of the corrugated heat exchanger fast and accurate, and the application is convenient. At the same time, the water-water heat transfer mode and the steam-water heat transfer mode are integrated into the same software in the course of the software development, and two heat transfer modes, no phase change heat transfer and phase change heat transfer mode, are designed in the corrugated tube heat exchanger, and the application range of the software is expanded. Some practical query windows are set up in the course of the development of the software, including the query window of the thermal conductivity of the pipe, the window of the center distance of the corrugated tube, and so on. For example, the tube window in the program design can be drawn on the screen by using the GDI drawing method in the program, which saves the designer's time of structure design. The two forms of table and calculation in the program also provide convenience for the designer's subsequent design.
【學位授予單位】：燕山大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TQ051.5

【參考文獻】

相關期刊論文 前9條

1 董其伍;劉敏珊;李燕;;波紋管換熱器管束支撐結構[J];節能;2006年02期

2 梁新;李皓;劉亞莉;李曉丹;;管殼式換熱器設計軟件的開發[J];計算機與應用化學;2008年05期

3 郭建民;周劍秋;;波紋管換熱器的應用與研究[J];氯堿工業;2009年06期

4 張仁峰;姚煒;;管殼式換熱器管板布管數量簡易計算[J];遼寧化工;2006年02期

5 俞惠敏,蔡業彬;幾種換熱管強化傳熱性能實驗分析與比較[J];流體機械;2003年06期

6 王志剛,戴光華;RichTextBox控件及其行距控制[J];計算機工程與應用;2002年22期

7 吳兵;行秋閣;魏曉炬;王華;;管殼式換熱器選型軟件的開發[J];陜西理工學院學報(自然科學版);2007年04期

8 曾敏,王秋旺,屈治國,柏巍,陶文銓;波紋管內強制對流換熱與阻力特性的實驗研究[J];西安交通大學學報;2002年03期

9 張忠林;侯紅串;吳微;何健懋;諸鴻梁;樊彩梅;;基于枚舉法的管殼式換熱器自動選型軟件設計[J];現代化工;2009年S1期

，

本文編號：1840579