本文選題：α-Al_O_日用瓷 + 抗折強度�。� 參考：《陶瓷學報》2017年02期

【摘要】：實驗以長石,高嶺土,瓷石,石英,滑石等原料為基礎,添加α-Al_2O_3制備日用瓷坯,探討不同的α-Al_2O_3加入量以及不同的α-Al_2O_3顆粒粒徑對坯體性能的影響,結果表明,當α-Al_2O_3的粒徑為0.5μm,添加量為9wt.%時,變形較小,在1380℃可以制備出強度為112.8 MPa,燒成收縮為9.4%,吸水率為0.12%的高檔日用瓷坯體。
[Abstract]:Based on the raw materials of feldspar, kaolin, porcelain stone, quartz, talc and so on, the daily porcelain billet was prepared by adding 偽 -Al2O3. The effects of different 偽 -Al2O3 addition amount and different 偽 -Al2O3 particle size on the properties of the billet were discussed. When the particle size of 偽 -Al2O3 is 0.5 渭 m and the addition amount is 9wt.%, the deformation is relatively small. The high-grade daily porcelain billets with strength of 112.8 MPA, sintering shrinkage of 9.4% and water absorption of 0.12% can be prepared at 1380 鈩，

本文編號：1796179