本文選題：巨磁阻抗 + 電流退火　； 參考：《華東師范大學學報(自然科學版)》2017年03期

【摘要】：采用高頻感應加熱熔融快淬法制各了Fe_(73.5)Cu_(1.0)Nb_(3.0)Si_(13.5)B_9非晶玻璃包裹絲.首先對制備態包裹絲進行電流退火,結果發現電流密度為4.2×10~7 A/m~2時,退火得到的玻璃包裹絲性能最佳,原因是此時有合適的納米晶體積比例.進而研究了長度對其磁性和巨磁阻抗效應的影響.結果表明,隨著長度的減小,微絲的各項異性場增大,磁阻抗比減小,采用退磁場模型給予了合理解釋.
[Abstract]:Using high frequency induction heating melt quench method Fe_ (73.5) Cu_ (1) Nb_ (3) Si_ (13.5) B_9 amorphous glass coated wire. Firstly deposited wire current annealing, the current density is 4.2 * 10~7 A/m~2, obtained by annealing microwires best performance. The reason is nanocrystalline volume ratio of the right. Then study the influence on the length of the magnetic properties and giant magneto impedance effect. The results show that with the length of the reduced anisotropy field increases actin filaments, GMI ratio decreases, the demagnetizing field model is explained.

【作者單位】： 華東師范大學物理與材料科學學院;
【基金】：國家自然科學基金(51302085;11574084;51572086)
【分類號】：TQ171.1
，

本文編號：1768898