本文關鍵詞：化學鍍錫工藝參數對沉積速率、鍍層厚度及表面形貌的影響，，由筆耕文化傳播整理發布。

1.

Influence of plating technic parameters on tensile strength of nickel foam

電鍍工藝參數對泡沫鎳抗拉強度的影響

2.

Effects of process parameters on the textures of tungsten coatings electrodeposited from Na_2WO_4-WO_3-ZnO molten salts

雙向脈沖電鍍工藝參數對Na_2WO_4-ZnO-WO_3熔鹽鍍鎢層織構的影響

3.

Effect of Plating Parameters on Plating Rate and Thickness as well as Surface Morphology of Electroless Tin Coating

化學鍍錫工藝參數對沉積速率、鍍層厚度及表面形貌的影響

4.

Effect of Process Parameters on Deposition Rate of Electroless Nickel Plating on Zinc Alloy

工藝參數對鋅合金表面化學鍍鎳速率的影響

5.

Effects of Processing Parameters on Microstructure and Properties of 800 MPa Hot Dip Galvanized Dual Phase Steel

工藝參數對800MPa熱鍍鋅雙相鋼組織性能的影響

6.

electrochemical etching and replating process

電化腐蝕和電鍍工藝

7.

Electroplating process for the die made of Al is presented.

介紹了鉸刀制造過程中，在鋁質胎具內孔電鍍的工藝過程和部分參數。

8.

Study on the Effects of Surface Pretreatment and Electronic Parameters on Micro-arc Oxidation Film on Thixoformed AZ91D Magnesium Alloy, and Chemical Plating Technique;

觸變成形AZ91D鎂合金表面預處理、電參數對微弧氧化膜的影響及化學鍍工藝的研究

9.

Study on Iron Electroplating and Fe-SiC Composite Electroplating Technics;

電鍍鐵及Fe-SiC復合電鍍工藝的研究

10.

Micro-via Filling and Through Hole Plating in one Process in Vertical Line

垂直電鍍線盲孔和通孔同步電鍍工藝

11.

Reliability of plated through hole (PTH) has close relationship with technology parameters during manufacture process.

鍍通孔的可靠性與制造過程工藝參數有非常密切的關系。

12.

Study on Processing Parameters, Morphologies and Deposition Principle of Electroless Plating Nanocrystalline Copper;

化學鍍納米銅膜的工藝參數和表面形貌及沉積原理研究

13.

Effect of Processing Parameters on Microstructure and Properties of Steel-based Chromium Plating

工藝參數對鋼基鍍硬鉻層微結構與性能的影響(英文)

14.

Numerical optimization of technical parameters of EMC of aluminum thin strip

鋁薄板電磁鑄造工藝參數的數值優化

15.

Optimization of machining parameters of EDM and its applications

電火花加工工藝參數的優化及其應用

16.

A Syudy on Ecm Database of Operating Parameter and Basic Process Law of Ecm

電解加工工藝參數數據庫及電解加工基本工藝規律研究

17.

Parameter Optimization of the Composite Electro-brush with Nanomaterial and the Performance of Composite Coating;

納米復合電刷鍍參數優化及鍍層性能研究

18.

Investigation of Underwater Arc Cutting and Its Technological Parameters

水下電弧切割現象和工藝參數的研究

  本文關鍵詞：化學鍍錫工藝參數對沉積速率、鍍層厚度及表面形貌的影響，由筆耕文化傳播整理發布。