本文選題：手工工藝　切入點：機械化生產工藝　出處：《四川師范大學》2017年碩士論文　論文類型：學位論文

【摘要】：對于日用陶瓷產品設計,傳統手作的生產工藝有自身的特點,也有不足的地方,而現代機械化生產工藝也是如此。審視二者的這些特點與不足,在工藝特征上呈現出明顯的互補性,形成新的現代內涵。從傳統手工工藝與機械化生產工藝相結合的現代表現方式入手,探究其結合實現的互補優勢、結合的原則和結合的途徑與條件。日用陶瓷產品設計要擺脫現有的困境,只有將兩種生產工藝取長補短有力的結合。當然,結合的模式有很多種,最為常用的是加工過程中某種工藝有利的介入,在立體造型或平面裝飾上,既要體現傳統手工的靈性,擴大影響,也要依靠現代機械的優勢和強項,增加個性,提高生產能力。因此,本課題擬從代表精準功能的機器生產和表征人性自由的手工技藝相結合的角度入手,從五個方面進行探究:第一階段,從論文研究背景、現狀、意義、內容方法、創新點幾個方面闡述本課題研究的必要性和可行性;第二階段,通過具體調研,總結出基于日用陶瓷設計,兩種生產工藝結合的新內涵下的具體表現形式;第三階段,基于立體造型與平面裝飾方面,從工藝角度,探討產品形態、材料在兩種生產工藝具體表現形式上各自的優劣;第四階段,通過對比分析兩種生產工藝優缺的情況下,進一步探討出兩種生產工藝之所以結合運用于日用陶瓷產品的設計分析;最終,以畢業設計充分采用理論與實踐相結合的方法加以論證。本課題希望以日用陶瓷的手工工藝與機械化生產工藝的對比性研究,通過畢業設計實踐來驗證其方法在日用陶瓷規模性生產設計、制造過程中的合理性與趨勢性,努力為強調使用功能為主要目的日用陶瓷生產制造找到適合發展的前進之路。
[Abstract]:For the design of daily ceramic products, the traditional hand-made production technology has its own characteristics and shortcomings, and so is the modern mechanized production technology. This paper presents obvious complementarities in process characteristics and forms new modern connotations. Starting from the modern expression mode of combination of traditional handicraft and mechanized production technology, this paper probes into the complementary advantages realized by the combination of traditional handicraft and mechanized production technology. The principle of combination and the ways and conditions of combination. In order to get rid of the existing predicament in the design of daily ceramic products, we must combine the two production processes to complement each other. Of course, there are many modes of combination. What is most commonly used is the beneficial intervention of a certain craft in the process of processing. In stereo modeling or plane decoration, we should not only embody the spirit of traditional handwork and expand our influence, but also rely on the advantages and strengths of modern machinery to increase our personality. Therefore, from the point of view of the combination of machine production, which represents precise functions, and the handicraft technology that characterizes human freedom, this paper will explore from five aspects: the first stage, the research background, the present situation and the significance of the thesis. The second stage, through the concrete investigation, summarizes the concrete manifestation under the new connotation of the combination of the two kinds of production technology based on the daily ceramic design, the second stage, through the concrete investigation, summarizes the concrete manifestation under the new connotation of the combination of the two kinds of production technology, according to the content method, the innovation point several aspects. The third stage, based on three-dimensional modeling and plane decoration, from the point of view of technology, to discuss the product form, material in the two specific forms of production process performance of their respective advantages and disadvantages; 4th stage, By comparing and analyzing the advantages and disadvantages of the two production processes, the author further discusses the reason why the two production processes are used in the design and analysis of daily ceramic products. It is demonstrated by the method of combining theory with practice in graduation design. This paper hopes to compare the handicraft and mechanized production technology of daily ceramic. Through the practice of graduation design to verify the rationality and trend of the method in the large-scale production design and manufacturing process of daily ceramics, and try to find a suitable way of development for the production and manufacture of domestic ceramics with emphasis on using function as the main purpose.
【學位授予單位】：四川師范大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TQ174.73

【參考文獻】

相關期刊論文 前10條

1 郭蔚;鄧霞;曹陽;;3D陶瓷打印的工藝特點與藝術特征[J];裝飾;2016年03期

2 李硯祖;;設計與手作——手作的社會學與哲學分析[J];南京藝術學院學報(美術與設計);2015年06期

3 王時音;強墨;;工業設計時代手工藝的回歸[J];包裝工程;2015年04期

4 詹韻;;純粹清亮——北歐日用陶瓷現狀分析[J];大眾文藝;2015年01期

5 林松;金愛英;;淺談日用陶瓷產品造型設計[J];美術大觀;2014年02期

6 王愛紅;陳汗青;;日用陶瓷產品設計在信息時代的發展趨勢[J];包裝工程;2013年22期

7 單日;;民間手工藝為現代產品設計注入靈魂——以臺州吳子熊玻雕藝術為例[J];大眾文藝;2013年12期

8 練新顏;;“工具制造者”還是“心靈制造者”?——?jiǎng)⒁姿埂っ⒏５抡撊说谋举|(zhì)[J];自然辯證法研究;2012年11期

9 傅兟;;傳統手工藝與先進制造技術的交融與研究[J];江蘇陶瓷;2007年05期

10 陳曉暉;;實用·經濟·美觀——論日用陶瓷的屬性[J];景德鎮陶瓷;2007年03期

相關碩士學位論文 前10條

1 王冬梅;亞克力材料在家具中的應用[D];四川師范大學;2016年

2 呂姝婷;技術革新、新造型、新生產模式[D];南京藝術學院;2016年

3 江文雯;漆藝與陶瓷相結合的家居飾品設計研究[D];中南林業科技大學;2015年

4 奕赫;日用陶瓷設計中形態與功能關系探究[D];吉林藝術學院;2015年

5 莫賢棠;人與技術關系的歷史演變[D];云南師范大學;2014年

6 王雅楠;現代日用陶瓷設計造型要素研究[D];山東工藝美術學院;2013年

7 詹韻;中國和北歐日用陶瓷設計理念比較研究[D];景德鎮陶瓷學院;2013年

8 楊心武;科學哲學視域中的“機器”本質探究[D];華東師范大學;2013年

9 查瑜琦;慢設計理念下的日用陶瓷產品設計研究[D];景德鎮陶瓷學院;2012年

10 馬良旭;有心之器—新觀念語境下的日用陶瓷產品設計研究[D];景德鎮陶瓷學院;2012年

，

本文編號：1588685