發布時間：2018-03-09 00:05

  本文選題：靜態浸潤性能　切入點：鋁用炭素材料　出處：《塑料工業》2017年08期 　論文類型：期刊論文

【摘要】：采用自行研制的浸潤性測定系統,研究了環氧樹脂對瀝青焦和電煅煤的靜態浸潤過程,分析了粒度分布、加熱溫度、浸潤時間、堆積密度對環氧樹脂與固體原料靜態浸潤性能的影響規律。研究表明,適當增加粒度分布、提高加熱溫度、延長浸潤時間、降低堆積密度均可改善環氧樹脂對瀝青焦和電煅煤的靜態浸潤效果。研究環氧樹脂與鋁用炭素材料固體原料的靜態浸潤特征規律,有利于確定環氧樹脂在混捏過程中的最佳配入量,對于環保型鋁用炭素材料的設計和開發具有重要意義。
[Abstract]:The static soaking process of epoxy resin on bituminous coke and electric calcined coal was studied by using the wettability measurement system developed by ourselves. The particle size distribution, heating temperature and soaking time were analyzed. The effect of packing density on the static wettability of epoxy resin and solid material. The results show that the particle size distribution is increased properly, the heating temperature is raised, and the soaking time is prolonged. The static wetting effect of epoxy resin on bituminous coke and electrically calcined coal can be improved by decreasing the packing density. It is helpful to determine the optimum dosage of epoxy resin in the process of mixing and kneading. It is of great significance for the design and development of environmentally friendly carbon materials for aluminum.
【作者單位】： 貴州師范大學材料與建筑工程學院;貴州省鋁電解炭素材料工程技術研究中心;貴州省教育廳無機非金屬功能材料重點實驗室;
【基金】：貴州省科學技術基金(黔科合J字[2013]2221號) 貴陽市白云區科技計劃(白科合同[2013]40號) 貴州省教育廳專業綜合改革試點項目(黔教高發[2013]446號)
【分類號】：TQ127.11;TQ323.5
，

本文編號：1586116