本文關鍵詞： 白光LED 玻璃陶瓷 YAG 熒光性能 熔融法　出處：《中國有色金屬學報》2017年09期 　論文類型：期刊論文

【摘要】：以NH_4H_2PO_4、SrCO_3、Na_2CO_3、Li_2CO_3、ZnO、H_3BO_3和Sb_2O_3為原料,采用熔融淬冷和后續球磨制備磷酸鹽玻璃粉體。將玻璃粉與YAG:Ce熒光粉均勻混合,利用二次熔融制得YAG:Ce塊體熒光玻璃陶瓷。利用XRD、SEM、熒光光譜儀等研究玻璃陶瓷的相組成、顯微結構和發光性能。結果表明:熒光粉均勻分布于玻璃基體中并得到很好地保存,沒有發生化學分解反應。激發光譜在340 nm和460 nm處有兩個激發峰。發射光譜在530nm左右有一寬峰,屬于Ce3+的5d→4f特征躍遷發射。通過對不同熔融溫度、不同熒光粉濃度和不同厚度的熒光玻璃陶瓷進行發光性能表征,發現最佳熒光粉摻雜濃度、最佳熔融溫度和最佳樣品厚度分別為8%(質量分?jǐn)?shù)),900℃和1.5 mm。該玻璃陶瓷封裝藍光芯片所得白光LED器件在540 mA驅動下的發光效率為93.4 lm/W,色坐標為(0.306,0.331),色溫為6867 K,顯色指數為72。研制的玻璃陶瓷是一種可用于白光LED的新型熒光材料。
[Abstract]:The phosphate glass powder was prepared by melt quenching and subsequent ball-milling with the raw materials of the Sb_2O_3 and the Sb_2O_3. YAG:Ce bulk fluorescent glass ceramics were prepared by secondary melting. The phase composition, microstructure and luminescence properties of glass ceramics were studied by XRDX SEM and fluorescence spectrometer. The results show that the phosphors are uniformly distributed in glass substrates and are well preserved. There is no chemical decomposition reaction. The excitation spectrum has two excitation peaks at 340nm and 460nm. The emission spectrum has a broad peak at 530 nm, which belongs to the 5d of Ce3. 鈫，

本文編號：1484475