發布時間：2018-11-06 08:29

【摘要】：利用水熱合成法,以三乙烯四胺(TETA)為模板劑,正硅酸乙酯、磷酸、氫氧化鋁及乙酸鈷為原料,合成了CoSAPO-34分子篩。通過掃描電子顯微鏡(SEM)、粉末X射線衍射(XRD)、熱重(TG)、N2吸附-脫附和紫外-可見漫反射光譜(UV-Vis DRS)等方法對合成的分子篩進行表征。以吡啶-正辛烷體系為模擬油品對分子篩催化劑的脫氮效果進行評價,考察了樣品的用量、光催化時間及循環催化次數對其脫氮性能的影響。結果表明:當合成原料的物質的量之比為n_(P_2O_5)∶n_(Al_2O_3)∶n_(SiO_2)∶n_(Co)∶n_(TETA)=1∶0.82∶0.26∶0.81∶2.05,在200℃晶化24 h,合成得到粒徑約為50μm、仍保持了SAPO-34分子篩的骨架結構、形貌為立方體的Co SAPO-34分子篩,而且該分子篩具有較好的熱穩定性。在500 W氙燈光照條件下反應150 min,樣品對質量分?jǐn)?shù)為100μg·g-1模擬油品的脫除率達到70%,循環3次光催化脫氮活性基本保持不變。
[Abstract]:CoSAPO-34 molecular sieve was synthesized by hydrothermal synthesis with triethylenetetramine (TETA) as template, ethyl orthosilicate, phosphoric acid, aluminum hydroxide and cobalt acetate as raw materials. The synthesized molecular sieves were characterized by scanning electron microscopy (SEM) (SEM), powder X-ray diffraction (XRD), thermogravimetric (TG), N2 adsorption desorption and UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS). The denitrification effect of molecular sieve catalyst was evaluated by using pyridine-n-octane system as the simulated oil. The effects of sample dosage, photocatalytic time and times of cycling catalysis on the denitrification performance of molecular sieve catalyst were investigated. The results show that when the ratio of the amount of material of synthetic raw material is n _ (P_2O_5): n _ (Al_2O_3): n _ (SiO_2): n _ (Co): _ (TETA) = 1: 0.82: 0.26: 0.81: 2.05, After crystallization at 200 鈩，

本文編號：2313739