發布時間：2018-04-22 17:32

  本文選題：聚對苯二甲酸乙二醇酯 + 擴鏈反應�。� 參考：《高分子材料科學與工程》2017年05期

【摘要】：以異氰脲酸三縮水甘油酯(TGIC)為擴鏈劑,采用熔融共混法制備擴鏈聚對苯二甲酸乙二醇酯(CEPET)。使用烏氏黏度計測量其特性黏數([η]),滴定法測定其端羧基(CV)的含量,使用旋轉流變儀和差示掃描量熱儀對擴鏈PET的流變和結晶性能進行分析。當TGIC的添加量為1.0 phr時,[η]=0.93 d L/g;當TGIC的添加量為1.4 phr時,CV=6.2mol/L。當TGIC的添加量為1.0 phr時,損耗模量和儲存模量的最大值分別為19500 Pa和28800 Pa。隨著TGIC添加量的增加,結晶度和結晶溫度先下降后上升,最低值分別為25.5%和181℃,半結晶時間先延長后縮短,最大值為1.8 min。
[Abstract]:Using triglycidyl isocyanurate (TGIC) as chain extender, chain extender polyethylene terephthalate (CEPET) was prepared by melt blending method. The intrinsic viscosity number ([畏]) of PET was measured by Wurtzmann viscometer, and the content of carboxyl group CVV was determined by titration. The rheological and crystallization properties of extended chain PET were analyzed by rotating rheometer and differential scanning calorimeter (DSC). When the addition of TGIC is 1.0 phr, [畏] 0.93 d L / g, and when the addition of TGIC is 1.4 phr, 6.2mol / L. When the addition of TGIC is 1.0 phr, the maximum values of loss modulus and storage modulus are 19500 Pa and 28800 Pa, respectively. With the increase of TGIC content, the crystallinity and crystallization temperature decreased first and then increased, the lowest values were 25.5% and 181 鈩，

本文編號：1788229