本文選題：聚乳酸 + 聚ε-己內酯��； 參考：《吉林大學》2017年碩士論文

【摘要】：聚乳酸(PLA)和聚ε-己內酯(PCL)作為領先的生物可降解合成聚酯,已經引起人們越來越多的關注。較比于直接聚合,開環聚合(ROP)丙交酯(LA)和ε-己內酯(ε-CL)單體能夠獲得高分子量的PLA和PCL產物。對于LA的聚合,異構體的作用對所得PLA材料的物理、機械、流變和降解性能至關重要。金屬配合物能夠良好地控制PLA結構和性能是生產PLA最有效的方法,包括分子量、組成、微結構和單體結合等方面,尤其是立體選擇性ROP,所得PLA的立構規整度,顯著影響其物理和化學性能�；谖覀兦捌诘墓ぷ�,第一部分我們以三種雙金屬中心席夫堿鋁配合物催化LA和ε-CL開環共聚,制備了一系列不同單體比例的共聚物。利用核磁(NMR)結果分析測定了共聚物中LA與ε-CL結構單元的比例及平均鏈段長度。通過對左旋丙交酯(L-LA)和外消旋丙交酯(rac-LA)分別與ε-CL開環共聚反應的動力學性能進行對比研究,發現該催化體系中LA的聚合速率快于ε-CL,而L-LA的聚合速率又略快于rac-LA。由此可以推知:所得共聚物為微觀組成漸變的梯度共聚物。利用DSC對所得共聚物進行了熱力學性能表征,發現隨著兩種結構單元比例的變化,共聚物的玻璃化轉變溫度(T_g)呈現規律性變化。鑒于金屬配合物很難從聚合產物中分離干凈從而限制材料的應用,人們更愿意使用無毒金屬(鋅)配合物催化環酯開環聚合。第二部分我們基于烯醇式配位結構,成功設計、合成和表征了一系列烯醇式單金屬中心鋅配合物,作催發劑催化LA、ε-CL開環聚合。研究發現烯醇式鋅配合物在聚合LA過程中表現出較高活性,催化劑苯環取代基的存在和配位胺橋的增長,易于單體配位插入的關系,能夠顯著提高催化劑的活性,配合物4a表現出最高的催化活性。聚合結果還發現催化體系異丙醇加入與否,對催化聚合反應并無影響,聚合物端機和NMR結果分析表明加入異丙醇并不參與配位。
[Abstract]:Polylactic acid (PLA) and poly (蔚 -caprolactone) (PCL) have attracted more and more attention as a leading biodegradable synthetic polyester.Compared with direct polymerization, ring-opening polymerization (ROP) lactide (LA) and 蔚 -caprolactone (蔚 -CL) monomers can obtain high molecular weight PLA and PCL products.For the polymerization of LA, the action of isomers is very important to the physical, mechanical, rheological and degradation properties of the obtained PLA materials.The structure and properties of PLA can be well controlled by metal complexes, which include molecular weight, composition, microstructure and monomers, especially stereoselective PLA.The physical and chemical properties are significantly affected.Based on our previous work, in the first part, a series of copolymers with different monomer ratios were prepared by the ring-opening copolymerization of LA and 蔚 -CL catalyzed by three kinds of bimetallic center Schiff base aluminum complexes.The ratio of LA to 蔚 -CL units and the average length of chain segments in the copolymers were determined by NMR.The kinetic properties of the ring-opening copolymerization of L-LLA and rac-lactide with 蔚 -CL were compared. It was found that the polymerization rate of LA was faster than that of 蔚 -CLand and the polymerization rate of L-LA was a little faster than that of rac-LA.It can be inferred that the obtained copolymer is a gradient copolymer with gradual microstructure.The thermodynamic properties of the copolymers were characterized by DSC. It was found that the glass transition temperature (TG) of the copolymers changed regularly with the change of the ratio of two structural units.In view of the fact that metal complexes are difficult to separate from polymeric products and thus limit the application of materials, nontoxic metal (zinc) complexes are preferred to catalyze the ring-opening polymerization of cycloesters.In the second part, based on the enol coordination structure, a series of enol monometallic zinc complexes were successfully designed, synthesized and characterized, which were used as catalysts to catalyze the ring-opening polymerization of LA-CL.It was found that the enol zinc complex exhibited high activity during the polymerization of LA. The presence of benzene ring substituents and the increase of the coordination amine bridge of the catalyst could improve the activity of the catalyst.Complex 4a showed the highest catalytic activity.The polymerization results also showed that the addition of isopropanol had no effect on the catalytic polymerization. The results of polymer terminal and NMR showed that the addition of isopropanol did not participate in the coordination.
【學位授予單位】：吉林大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：O643.3;O631.5

【相似文獻】

相關期刊論文 前10條

1 顏明發;王濤;黃永凱;強娜;全大萍;;芐醇存在下脂肪叔胺催化內酯開環聚合[J];高分子學報;2011年11期

2 農;;有機環硅胺的開環聚合[J];化學通報;1965年06期

3 ;環戊烯開環聚合催化劑及其聚合反應的研究[J];蘭州大學學報;1977年03期

4 張鴻志,董修智,馮新德;四氫呋喃開環聚合的研究[J];高分子通訊;1978年02期

5 甘孝賢;;自由基開環聚合[J];化學通報;1986年11期

6 劉德海;李露;閔利;劉道玉;;有機鉬、鎢化合物研究 Ⅳ.新的環烯開環聚合催化體系及聚合物性質的初步研究[J];化學學報;1986年12期

7 郭群暉;張玉成;官碧琴;;四氫呋喃開環聚合的研究[J];廣州化學;1988年04期

8 曹維孝,穆懷萍,張驪,馮新德;硅醚-有機鋁體系引發氧化環己烯光開環聚合[J];高分子學報;1989年06期

9 郭群暉;張玉成;官碧琴;;四氫呋喃開環聚合的研究[J];聚氨酯工業;1989年02期

10 陸愛軍，，鄧元;四氫呋喃陽離子開環聚合的研究[J];合成技術及應用;1994年01期

相關會議論文 前10條

1 張騰;洪挺;戴曉書;崔帆;蔡晴;金日光;;六氯環三膦腑熔融開環聚合反應動力學的研究[A];2005年全國高分子學術論文報告會論文摘要集[C];2005年

2 朱明強;樊俊兵;李亞婧;;己內酯的常溫綠色開環聚合[A];2011年全國高分子學術論文報告會論文摘要集[C];2011年

3 王小鶯;廖凱榮;全大萍;伍青;;醇鐵化合物催化丙交酯開環聚合的研究[A];中國生物醫學工程學會第六次會員代表大會暨學術會議論文摘要匯編[C];2004年

4 高波;龐p

本文編號：1759511