本文選題：微膠囊　切入點：層層自組裝　出處：《高分子材料科學與工程》2017年08期 　論文類型：期刊論文

【摘要】：以碳酸鈉和氯化鈣為原料制備的碳酸鈣微球?yàn)槟０?采用層層自組裝的方法,將左旋聚乳酸(PLLA)和右旋聚乳酸(PDLA)逐層組裝在碳酸鈣微球上,然后用乙二胺四乙酸二鈉(EDTA)去除模板碳酸鈣后成功制備了聚乳酸中空微膠囊,并采用掃描電鏡、原子力顯微鏡、透射電子顯微鏡、激光共聚焦顯微鏡、差示掃描量熱儀和廣角X射線衍射儀對微膠囊進行初步表征。結果表明,微膠囊層形成的層間驅動力為聚乳酸異構體之間的立構復合作用,微膠囊呈現經典的褶皺狀,囊壁厚度約為90~100nm,內部為空腔結構,囊壁允許小分子物質透過,在載藥緩釋領域具有很好的應用前景。
[Abstract]:Calcium carbonate microspheres, prepared from sodium carbonate and calcium chloride, were assembled layer by layer on calcium carbonate microspheres by layer-by-layer self-assembly method. Polylactic acid hollow microcapsules were successfully prepared by removing template calcium carbonate with EDTA-EDTA. Scanning electron microscope, atomic force microscope, transmission electron microscope, laser confocal microscope were used to prepare polylactic acid hollow microcapsules. Differential scanning calorimetry (DSC) and wide-angle X-ray diffractometer (WAXD) were used to characterize microcapsules. The results showed that the interlaminar driving force of microencapsulation was the combination of polylactic acid isomers, and the microcapsules showed classic folds. The thickness of the capsule wall is about 90 ~ 100 nm, and the internal cavity structure is hollow. The wall of the capsule allows small molecules to permeate, so it has a good application prospect in the field of drug delivery sustained release.
【作者單位】： 纖維材料改性國家重點實驗室東華大學材料科學與工程學院;
【分類號】：O633.14

【相似文獻】

相關期刊論文 前10條

1 朱瑞宜;配糖蛋白B腸溶微膠囊的研究[J];功能高分子學報;1997年03期

2 朱瑞宜,H.M.Norbury;配糖蛋白B-陽離子丙烯酸樹脂微膠囊的性能研究[J];功能高分子學報;1991年04期

3 陳國,姚善涇;CMC-NaCS/PDMDAAC微膠囊的制備及傳質性能研究[J];化學反應工程與工藝;2005年02期

4 柴q，

本文編號：1631050