本文選題：PCB + 回收��； 參考：《環境科學與技術》2016年S2期

【摘要】：提出了一種廢棄PCB板熱拆解回收過程尾氣治理方法,其特征是待處理尾氣首先經過活性炭吸附裝置,濾除尾氣中的固體粉塵、重金屬顆粒、部分無機非金屬氧化物以及部分有機氣體等;再將預處理后的尾氣通入噴淋塔,使其與噴淋塔中的堿性凈化液充分反應,去除大部分無機非金屬氧化物和部分有機氣體;最后將噴淋塔頂部排出的尾氣通入高溫燃燒設備進行燃燒處理,最終排放出無污染的氣體。試驗結果表明,該方法有效地解決了廢棄PCB板熱拆解回收過程的二次污染問題,同時部分利用了尾氣中可燃?xì)怏w成分。
[Abstract]:In this paper, a method of removing waste gas from waste PCB plate is proposed, which is characterized by that the tail gas to be treated is first treated by activated carbon adsorption device to filter the solid dust and heavy metal particles in the tail gas. Some inorganic nonmetallic oxides and some organic gases, and then the tail gas after pretreatment is passed into the spray tower to fully react with the alkaline purifying liquid in the spray column to remove most of the inorganic nonmetallic oxides and some organic gases. Finally, the exhaust gas from the top of the spray tower is put into the high temperature combustion equipment for combustion treatment, and the non-polluting gas is discharged finally. The experimental results show that this method can effectively solve the secondary pollution problem in the process of thermal decomposition and recovery of waste PCB plate, and partly utilize the combustible gas composition in the tail gas.
【作者單位】： 合肥工業大學機械工程學院;
【基金】：中央高校基本科研業務費專項基金(JZ2016HGBZ0797) 國家自然科學基金(51075115) 國家科技支撐計劃項目(2011BAF11B06)
【分類號】：X701;X705

【相似文獻】

相關碩士學位論文 前1條

1 王慶陽;廢棄PCB板電子元件和焊料的分離方法研究[D];合肥工業大學;2014年

，

本文編號：1912709