【摘要】：正碳酸亞鐵由于制備工藝的特殊,往往含有碳酸氫亞鐵,所以碳酸亞鐵的含量一般不以FeCO3來表示,而用Fe~(2+)的含量來表示。純碳酸亞鐵中Fe~(2+)的理論質量分數為48.2%,純碳酸氫亞鐵中Fe~(2+)的理論質量分數僅為31.4%,市售碳酸亞鐵的Fe~(2+)質量分數一般在38%~42%之間。因此如何分別測定碳酸亞鐵和碳酸氫亞鐵的含量至關重要。由于碳酸亞鐵中的碳為常量元素,用紅外吸收光譜法[1]或國
[Abstract]:Due to the special preparation process, ferrous carbonate often contains ferrous bicarbonate, so the content of ferrous carbonate is not usually expressed by FeCO3, but by the content of Fe2. The theoretical mass fraction of Fe ~ (2) in pure ferrous carbonate is 48.2%, the theoretical mass fraction of Fe ~ (2) in pure ferrous carbonate is only 31.4%, and the mass fraction of Fe ~ (2) in commercial ferrous carbonate is generally between 38% and 42%. Therefore, it is very important to determine the content of ferrous carbonate and ferrous bicarbonate respectively. Since the carbon in ferrous carbonate is a constant element, the infrared absorption spectrometry [1] o
【作者單位】： 上海拱極化學有限公司;
【分類號】：TQ138.11;O652

【相似文獻】

相關期刊論文 前2條

1 喻勝飛,馬冀湘,羅武生;利用鈦白生產中的廢酸制硫酸鉀及復混肥[J];廣東化工;2000年02期

2 ;[J];;年期

相關重要報紙文章 前1條

1 ;飼料中鐵補充物的差異[N];中國畜牧獸醫報;2008年

，

本文編號：2159419