本文選題：三維編織復合材料 + 圓柱銷�。� 參考：《北京航空航天大學學報》2016年02期

【摘要】：復合材料緊固件連接技術是復合材料結構加工制造的關鍵技術之一,針對三維編織復合材料圓柱銷緊固件的剪切性能進行了試驗和有限元數值模擬分析。試件采用了三維全五向編織工藝進行制備。通過雙剪性能測試得到了三維編織復合材料圓柱銷的極限承載能力和破壞斷裂形式,采用均勻化方法對圓柱銷試件的宏觀彈性常數進行了預測,采用改進后的Tsai-Hill準則并引入連續介質損傷力學建立了一套三維編織復合材料強度分析方法,并根據該方法對圓柱銷試件在剪切載荷作用下的漸進失效破壞過程進行了有限元分析,計算結果與試驗結果具有良好的一致性,表明提出的強度分析方法在預測三維編織復合材料結構件的宏觀強度性能方面是有效可行的。
[Abstract]:The bonding technology of composite fasteners is one of the key technologies in the fabrication of composite structures. The shear behavior of three-dimensional braided composite cylindrical pins fasteners is tested and analyzed by finite element numerical simulation. Three-dimensional five-dimensional braiding process was used to prepare the specimens. The ultimate bearing capacity and failure fracture form of 3-D braided composite cylindrical pin were obtained by double shear test. The macroscopic elastic constants of cylindrical pin specimens were predicted by homogenization method. Using the improved Tsai-Hill criterion and introducing the damage mechanics of continuous medium, a set of strength analysis method for 3D braided composites is established. According to this method, the progressive failure process of cylindrical pin specimen under shear load is analyzed by finite element method. The calculated results are in good agreement with the experimental results. The results show that the proposed strength analysis method is effective and feasible in predicting the macroscopic strength properties of 3D braided composite structures.
【作者單位】： 北京航空航天大學航空科學與工程學院;
【分類號】：V214.8
，

本文編號：2047013