本文選題：T形管 + 導流塊　； 參考：《機床與液壓》2016年20期

【摘要】：T形管用于某飛機防冰系統,在T形管(三通)處高溫空氣分成兩路,分別從兩出口流出,兩路流量比例為4∶1。通過計算分析確定T形管導流塊的近似安裝位置,并通過試驗驗證其合理性,對同類形T形管導流塊的設計起到一定指導作用。
[Abstract]:The T-pipe is used in the anti-ice system of an aircraft. The high-temperature air at the T-pipe (three-way) is divided into two channels, which flow out from two exits respectively, with a flow ratio of 4: 1. The approximate installation position of T-shaped tube diversion block is determined by calculation and analysis, and its rationality is verified by experiment, which plays a guiding role in the design of similar T-tube diversion block.
【作者單位】： 空軍駐新鄉地區軍事代表室;
【分類號】：V244.15
，

本文編號：2043774