本文選題：宇航用 + 射頻��； 參考：《蘇州大學》2016年碩士論文

【摘要】：隨著我國空間技術的飛速發展,各航天器的發射任務日益增多,各個系統所需要的連接器和電纜組件種類及規格也日益多樣化,普通連接器和電纜組件已經無法滿足型號要求,而國內連接器和電纜組件的質量可靠性等級長期以來都停留在較低的水平,尤其是射頻同軸連接器及電纜組件(以下簡稱產品),雖然普通軍用等級產品發展已經比較成熟,但國產宇航用射頻同軸電纜組件仍有很多空白。本文通過產品失效情況的統計及分析,并結合宇航應用提出的新要求,對宇航用產品的設計要求進行了闡述。在理論分析的基礎上,對空間適應性設計、結構設計、可靠性設計及實現工藝進行分析,并提出相應的設計方案和工藝方案,主要包括根據輻照、熱真空釋氣的苛刻條件分析薄弱點及敏感特性,實現正確選材。并從熱設計、防腐蝕、老化設計等方面采取措施,以提高其固有可靠性。最后對產品生產工藝進行詳細分析,找出關鍵工藝并提出控制措施。產品實現后制定了詳細的試驗驗證方案,對產品進行全面的檢測和試驗,包括全性能分析試驗、結構分析試驗、極限評估試驗及壽命考核強化試驗等。所有試驗結果表明該產品具有優良的機械性能、電氣性能及環境性能,具有較高的宇航空間適應性,所有性能指標均不低于國內外同類產品,尤其是SMA、TNC系列產品電壓駐波比可以達到1.25,遠高于國外同類產品,達到了國內領先、國際先進的水平,為其他宇航用元器件系統性開發奠定良好基礎。
[Abstract]:With the rapid development of space technology in our country, the launching missions of each spacecraft are increasing day by day, and the types and specifications of connectors and cable assemblies required by each system are becoming more and more diversified, and ordinary connectors and cable assemblies can no longer meet the requirements of models. However, the quality and reliability levels of domestic connectors and cable assemblies have remained at a relatively low level for a long time, especially the RF coaxial connectors and cable assemblies (hereinafter referred to as "products"), although the development of ordinary military grade products has been relatively mature. But domestic aerospace radio frequency coaxial cable assembly still has a lot of blank. Based on the statistics and analysis of product failure and the new requirements of aerospace applications, the design requirements of aerospace products are described in this paper. On the basis of theoretical analysis, the space adaptive design, structure design, reliability design and realization process are analyzed. The harsh conditions of thermal vacuum gas release are used to analyze the weakness and sensitive characteristics to realize the correct material selection. Measures are taken to improve the inherent reliability of thermal design, corrosion resistance and aging design. Finally, the production process of the product is analyzed in detail, the key process is found out and the control measures are put forward. After the realization of the product, a detailed test and verification scheme was made, and the product was tested and tested comprehensively, including the full-performance analysis test, the structure analysis test, the limit evaluation test and the life assessment strengthening test, etc. All the test results show that the product has excellent mechanical, electrical and environmental properties, and has higher space adaptability, and all the performance indexes are not lower than those of similar products at home and abroad. Especially, the voltage standing wave ratio of SMA-TNC series products can reach 1.25, which is much higher than the similar products of foreign countries, and has reached the advanced level of domestic and international, which lays a good foundation for the systematic development of other aerospace components.
【學位授予單位】：蘇州大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：V423

【參考文獻】

相關期刊論文 前6條

1 林思達;潘駿;陳文華;賀青川;盧獻彪;;電連接器可靠性研究述評[J];機電元件;2009年04期

2 陳文華;李紅石;連文志;潘駿;盧獻彪;;航天電連接器環境綜合應力加速壽命試驗與統計分析[J];浙江大學學報(工學版);2006年02期

3 陳學永,董文亮;電連接器可靠性設計探討[J];機電元件;2005年01期

4 楊?yuàn)^為;航天電連接器失效預防[J];上海航天;2003年01期

5 楊?yuàn)^為;航天用電連接器的接觸可靠性研究[J];上海航天;2000年06期

6 童靖宇;;空間冷焊效應及其防護技術研究[J];航天器環境工程;2000年01期

，

本文編號：2042341