本文選題：三維 + 工序模型�。� 參考：《現代制造工程》2016年03期

【摘要】：三維工藝全信息工序模型貫穿整個三維工藝設計、制造過程。在三維工藝全信息工序模型的構建中,能否對中間工序模型進行快速建模直接影響了三維工藝全信息工序模型構建的效率。為了提高已有三維工藝設計系統的適用性,便于對其進行推廣應用,提供了一種基于刀軌的工序模型生成方案,通過計算刀具沿刀軌運動所成包絡面來切削毛坯零件,實現仿真切削,形成本步工序模型,并對通過在此工序模型上添加零件幾何信息、工藝信息來構建三維工藝全信息工序模型的方法進行了探討。通過實例驗證了該理論方法的可行性。
[Abstract]:Three-dimensional process information process model runs through the whole three-dimensional process design and manufacturing process. In the construction of 3D process full information process model, whether the intermediate process model can be quickly modeled has a direct impact on the efficiency of 3D process full information process model construction. In order to improve the applicability of the existing 3D process planning system and facilitate its popularization and application, a process model generation scheme based on the tool track is provided, which can be used to cut the blank parts by calculating the envelope surface formed by the tool moving along the tool track. The simulation cutting is realized and the process model of this step is formed. The method of constructing the 3D process model with geometric information and process information is discussed. The feasibility of the method is verified by an example.
【作者單位】： 沈陽航空航天大學航空制造工藝數字化國防重點學科實驗室;
【分類號】：V262

【相似文獻】

相關期刊論文 前7條

1 王麗雅;韓捷;雷文平;;基于MATLAB的全信息虛擬時頻分析儀設計[J];礦山機械;2007年03期

2 蔣紅霞;黃曉榮;;基于全信息新陳代謝的GM(1,1)電力預測[J];計算機技術與發展;2012年01期

3 馮彩紅;韓捷;李凌均;;全信息小波分析及其在旋轉機械故障診斷中的應用[J];中國工程機械學報;2005年04期

4 馮彩紅;韓捷;李凌均;;全信息小波包分析及其在旋轉機械故障診斷中的應用[J];機械強度;2006年05期

5 董辛e，

本文編號：2040716