本文選題：飛機防冰除冰　切入點：電脈沖除冰(EIDI)　出處：《北京航空航天大學學報》2016年10期 　論文類型：期刊論文

【摘要】：電脈沖除冰(EIDI)作為一種電動-機械式除冰系統,具有廣闊的應用前景。本文采用線圈和金屬平板組成的電脈沖系統作為EIDI結構動力學模型的研究對象,基于有限元分析軟件MSC/NASTRAN,建立了一套針對典型平板-線圈結構的EIDI系統結構動力學仿真模型,研究了模型的固有特性(模態與頻率)與時域響應分析,并開展了仿真模型的實驗驗證。研究了基于模型的EIDI系統結構動力學特性,重點關注最大應變和位移在空間的分布規律,并討論了電容、電壓等放電參數的影響。研究表明,電脈沖作用下,平板最大位移分布特性近似“馬鞍型”,提升電容和電壓可以增大脈沖力峰值和結構變形量,同時減小固定位置處的應變。
[Abstract]:As an electric-mechanical deicing system, the electric pulse deicing system (EIDI) has a broad application prospect. In this paper, the electric pulse system composed of coil and metal plate is used as the research object of the dynamic model of EIDI structure. Based on the finite element analysis software MSC-NASTRAN, a dynamic simulation model of EIDI system is established for a typical plate-coil structure. The inherent characteristics (modal and frequency) and time-domain response analysis of the model are studied. The dynamic characteristics of the EIDI system based on the model are studied, the distribution of maximum strain and displacement in space is focused on, and the effects of discharge parameters such as capacitance and voltage are discussed. Under the action of electric pulse, the maximum displacement distribution of the plate is similar to that of "saddle type". Lifting capacitance and voltage can increase the peak value of pulse force and the deformation of the structure, and decrease the strain at the fixed position at the same time.
【作者單位】： 北京航空航天大學航空科學與工程學院;中國空間技術研究院;
【分類號】：V244.1+5

【相似文獻】

相關會議論文 前1條

1 趙春華;葉紅玲;胡騰;;單根簧片正反向折疊過程的有限元模擬[A];北京力學會第20屆學術年會論文集[C];2014年

相關碩士學位論文 前1條

1 羅吉;股骨多尺度有限元分析[D];重慶大學;2011年

，

本文編號：1595135