【摘要】：在鍋爐風煙系統中,大多數差壓測量均無需對取壓管路空氣柱靜差壓進行補償,但在測量風箱-爐膛差壓時,變送器兩側取壓點在垂直方向上跨越的距離較大,取壓管內空氣柱靜差壓與實際測量差壓數量級相同,因此,必須對測量結果進行補償。但是,目前的風箱爐膛差壓測量系統均未引入空氣柱靜差壓的補償,從而導致該差壓的表盤顯示值比設計值偏低較多,使運行人員誤認為未能建立起正常的風箱爐膛差壓,而采取錯誤的運行操作措施。建議盡快引入風箱爐膛差壓的補償計算,以便為運行人員提供準確的監控信息。
[Abstract]:In the boiler air smoke system, most differential pressure measurements do not need to compensate the static differential pressure of the air column in the pipeline, but when measuring the differential pressure between the bellows and the furnace, the pressure points on both sides of the transmitter span a large distance in the vertical direction. The static differential pressure of the air column in the pressure pipe is the same as the actual measured differential pressure, so the measurement results must be compensated. However, none of the current bellows furnace differential pressure measurement systems have introduced the compensation of the static differential pressure of the air column, which leads to the fact that the dial display value of the differential pressure is much lower than the designed value, which makes the operator mistake that the normal differential pressure of the bellows furnace can not be established. Take the wrong operation measures. It is suggested that compensation calculation of bellows furnace differential pressure should be introduced as soon as possible in order to provide accurate monitoring information for operators.
【作者單位】： 國網山東省電力公司電力科學研究院;國電石橫發電有限公司;
【分類號】：TK223

【相似文獻】

相關期刊論文 前10條

1 王月權;;精煉系統差壓泵的應用[J];小氮肥;2009年02期

2 方立德;盧慶華;李小亭;張計科;何青;張W，

本文編號：2293634