【摘要】：在地質工作中經常遇到收集的圖件資料格式不一,如何轉換與共享一直是個難題,湖南省基礎地理信息1∶10000數字線劃圖入庫數據就是使用ESRI的E00通用交換格式,雖經MapGis6.7文件轉換能自動轉換,但轉換后的點線面文件丟失圖形參數,尤其注釋信息全無,無法還原,需手工逐步添加與修改,工作量大且易出錯,作者通過對MapGis6.7轉換后點、線、面文件進行分析,并與E00格式文件進行對比,找出對應關系,提出注釋分字符中心點位算法,利用Visual Basic6.0編程,實現MapGis轉換后的點線面文件一次性自動轉換,完成地形圖E00格式到MapGis6.7格式的完全自動轉換與對接,簡化工作,提高效率,也為其它格式的入庫地形圖數據轉換提供參考與借鑒。
[Abstract]:In the geological work, the format of the collected map data is often different. How to convert and share the basic geographic information of Hunan Province is always a difficult problem. The basic geographic information of Hunan Province, 1: 10 000 digital line drawing data, is to use the E00 universal exchange format of ESRI. Although it can be automatically converted by MapGis6.7 file conversion, the transformed dot-line file has lost graphic parameters, especially the annotated information can not be restored, so it needs to be added and modified by hand step by step, and the workload is large and error-prone. The author makes use of the points and lines after MapGis6.7 conversion. The plane file is analyzed and compared with the E00 format file to find out the corresponding relation. The algorithm of the central point position of the annotated sub-character is put forward, and the point line plane file after MapGis conversion is realized by Visual Basic6.0 programming. Complete the automatic conversion and docking from E00 format to MapGis6.7 format of topographic map, simplify the work, improve the efficiency, and also provide reference and reference for the conversion of topographic map data in other formats.
【作者單位】： 湖南省煤炭地質勘查院;國防科學技術大學計算機學院網絡所;
【分類號】：P208
，

本文編號：2268662