本文關鍵詞： 中深孔 臺車 測量方法 上向扇形孔　出處：《中國礦業》2016年10期 　論文類型：期刊論文

【摘要】：普通雙人操作型鉆機進行中深孔采礦時,通常使用傳統的測量方法。這種測量方法比較粗糙,炮孔定位和施工精度較低,會造成爆破孔分布不均或定位不準確,無法嚴格按照設計施工,容易導致爆破后出現超挖、欠挖、采場輪廓不規則等情況,甚至揭露F1冒落。本文針對臺車中深孔采礦作業特點,提出了一整套創新的測量技術方案,在三山島金礦中深孔采礦方法的試驗中成功進行了應用,大大提高了現場作業的精度、效率和安全性,保證了中深孔采礦整體的施工質量和安全質量,并在后期爆破中取得了良好的爆破效果,在同行業其他礦山的生產中具有推廣和借鑒意義。
[Abstract]:The conventional measuring method is usually used in the middle and deep hole mining of common double operation rig, which is rough, low precision of hole location and construction, which will result in uneven distribution of blasting holes or inaccurate positioning of blasting holes. It is difficult to strictly follow the design and construction, which can easily lead to over-excavation, underexcavation, irregular outline of stope after blasting, and even expose F1 caving. This paper aims at the characteristics of medium and deep hole mining operation of bench wagon. A set of innovative measurement technique scheme is put forward, which has been successfully applied in the test of the medium and deep hole mining method of Sanshandao Gold Mine, which greatly improves the accuracy, efficiency and safety of the field operation. The construction quality and safety quality of the whole medium and deep hole mining are guaranteed, and good blasting effect is obtained in the later stage of blasting, which is of great significance in the production of other mines in the same industry.
【作者單位】： 山東黃金礦業(萊州)有限公司三山島金礦;
【分類號】：TD175
【正文快照】： 為了確保中深孔采礦按設計施工及達到預期的爆破效果,需要嚴格控制施工精度,比普通的光爆效果要求更高。這就要求測量技術人員嚴格管控現場測量質量,并及時對測量精度進行評價,對不合格的點位需要重測、重新鉆孔,才能保證中深孔采礦整體的施工質量和安全質量。鉆鑿爆破孔的精

【相似文獻】

相關期刊論文 前2條

1 周傳志,談超,蔣明勇,李東暉,吳應湘,高宇欣;智能WGL-1型采礦中深孔深度傾角測量儀[J];冶金自動化;2001年05期

2 ;[J];;年期

，

本文編號：1464436