The design,fabrication and characterization of a fundamental/first-order mode converter based on multimode interference coupler on InP substrate were reported.Detailed optimization of the device parameters were investigated using 3D beam propagation method.In the experiments,the fabricated mode converter realized mode conversion from the fundamental mode to the first-order mode in the wavelength range of 1530-1565 nm with excess loss less than 3 dB.Moreover,LP₀₁ and LP₁₁ fi...

【文章頁數(shù)】：5 頁

【文章目錄】：
1. Introduction
2. Principal of mode conversion
3. Device design and simulation
4. Device fabrication and experimental results
5. Conclusion



本文編號：4004421