【摘要】：基于UMC 0.25μm BCD工藝,設計了一款高精度過溫保護電路。通過基準電路中三極管的基極-發射極電壓的負溫度特性實現溫度檢測,調節電阻的比值產生遲滯溫度量,避免了電路熱振蕩現象。經過HSPICE仿真驗證,電路在溫度130℃時,過溫保護信號發生翻轉,關斷芯片,待溫度降低到99℃時再次開啟,具有31℃遲滯量。在電源電壓變化時,過溫保護電路的過溫閾值和遲滯溫度漂移量最大僅為0.24℃偏差。
[Abstract]:Based on UMC 0. 25 渭 m BCD process, a high-precision over-temperature protection circuit is designed. The temperature detection is realized by the negative temperature characteristic of the base-emitter voltage of the Triode in the reference circuit, the hysteresis temperature is produced by adjusting the ratio of the resistor, and the thermal oscillation of the circuit is avoided. The circuit is verified by HSPICE simulation, when the temperature is 130 鈩，

本文編號：2319840