發布時間：2018-07-20 11:54

【摘要】：針對電磁超聲導波大功率激勵信號的線性放大問題,研究采用多個功率場效應管線性放大并聯輸出電路作為功率輸出級,以提高線性放大后信號輸出功率的方法。采用前級場效應管線性放大電路源極驅動方式為功率輸出級電路設置靜態工作點,并提供瞬態交流輸入信號。采用差分結構配置整個電路以抑制開關特性引起的抖動,從而實現低功耗、大瞬態輸出功率的線性放大電路的設計。試驗結果表明,該線性放大電路能驅動中心頻率為180 k Hz的電磁超聲傳感器,且能獲得高信噪比的導波檢測信號;在驅動50?標準負載時能輸出瞬態功率可達1.8 k W的導波激勵信號,且波形失真小。所提出的電磁超聲導波大功率激勵信號的線性放大方法能有效指導該類電路的設計。
[Abstract]:Aiming at the problem of linear amplification of high power excitation signal of electromagnetic ultrasonic guided wave, a method of improving the output power of linear amplified signal by using multiple power FET linear amplifying parallel output circuits as power output stage is studied. In this paper, the source driving mode of the linear amplifier of the front stage FET is used to set the static operating point for the power output stage circuit, and to provide the transient AC input signal. The differential structure is used to configure the whole circuit to suppress the jitter caused by the switching characteristics, so as to realize the design of the linear amplifier circuit with low power consumption and large transient output power. The experimental results show that the linear amplifier can drive the electromagnetic ultrasonic sensor with a central frequency of 180kHz and obtain a high signal-to-noise ratio (SNR) guided wave detection signal. Under standard load, a pilot wave excitation signal with a transient power of 1.8 kW can be output, and the waveform distortion is small. The proposed linear amplification method of electromagnetic ultrasonic guided wave high power excitation signal can effectively guide the design of this kind of circuit.
【作者單位】： 中北大學機械與動力工程學院;中國特種設備檢測研究院國家質量監督檢驗檢疫總局無損檢測與評價重點實驗室;
【基金】：質檢公益性行業科研專項(201410026,201510068) 國家重點研發計劃課題(2016YFF0203003)資助項目
【分類號】：TN722

【相似文獻】

相關期刊論文 前3條

1 孫亦玲;八達“絕對線性放大電路”剖析[J];視聽技術;2003年06期

2 劉成國;楊國緯;劉尚合;;一種非線性元件實現線性放大的改進技術與仿真[J];電波科學學報;2013年02期

3 ;名特優新[J];印制電路信息;1995年05期

，

本文編號：2133434