本文選題：陰燃 + 紅外測溫�。� 參考：《消防科學與技術》2017年10期

【摘要】：采用紅外熱像儀探測樟子松凋落物陰燃溫度,并通過溫度擬合提高紅外熱像儀的使用精度,為陰燃火災的探測提供精確的溫度數據基礎。設置風速0~3 m/s、探測距離1~10 m、探測角度30°~60°的工況,分別采用紅外熱像儀和熱電偶進行測溫,以熱電偶測溫為基準溫度,研究紅外熱像儀探測陰燃的使用精度和誤差。實驗得出:紅外熱像儀的有效探測距離為8 m,測溫的相對誤差隨著探測距離、探測角度以及森林風速的增大而升高。利用MATLAB得出不同風速的工況下紅外熱像儀測溫的相對誤差與探測距離、探測角度的二元二次非線性擬合方程,為森林陰燃火災探測提供數據基礎。
[Abstract]:Infrared thermal imager is used to detect smoldering temperature of litter of Pinus sylvestris var. mongolica, and the precision of infrared thermal imager is improved by temperature fitting, which provides accurate temperature data basis for detecting smoldering fire. Setting the wind speed of 0 ~ 3 m / s, detecting distance of 1 ~ 10 m, detecting angle of 30 擄~ 60 擄, using infrared thermograph and thermocouple to measure the temperature, taking the thermocouple as the reference temperature, the application accuracy and error of the infrared thermal imager for detecting smoldering are studied. The experimental results show that the effective detection range of infrared thermal imager is 8 m.The relative error of temperature measurement increases with the increase of detection distance, detection angle and forest wind speed. The binary quadratic nonlinear fitting equation of temperature measurement error, detection distance and detection angle of infrared thermal imager under different wind speed is obtained by MATLAB, which provides a data basis for forest smoldering fire detection.
【作者單位】： 東北林業大學工程技術學院;
【基金】：中央高�；究蒲袠I(yè)務費專項資金資助項目(2572015CB05)
【分類號】：S762.32;TN219

【相似文獻】

相關期刊論文 前1條

1 張恒;金森;邸雪穎;;基于FWI濕度碼的塔河林業局地表凋落物含水率預測[J];應用生態學報;2014年07期

相關碩士學位論文 前1條

1 者香;泥炭粒徑、含水率和無機物含量對陰燃蔓延速率影響的實驗研究[D];中國科學技術大學;2015年

，

本文編號：1989385