發布時間：2018-05-19 23:31

  本文選題：激光器 + 氣體激光器��； 參考：《中國激光》2017年06期

【摘要】：短蒸氣室自加熱堿金屬激光器的原理是利用未被增益介質吸收的抽運光加熱堿金屬蒸氣室�；谌芗�(jí)速率方程,建立了半導體激光雙端抽運堿金屬激光器的理論模型,研究了增益介質長度、蒸氣室溫度和抽運源線寬等參數對短蒸氣室自加熱堿金屬激光器輸出激光的影響。研究結果表明,在普通外腔半導體激光器抽運下,增益介質長度為2mm時可以實現瓦級激光輸出,選擇較高的抽運光功率可提高自加熱堿金屬激光器的輸出功率。該研究結果將為自加熱堿金屬激光器的實驗提供理論基礎,并可進一步拓展小功率堿金屬激光器的應用領域。
[Abstract]:The principle of short vapor chamber self-heating alkali metal laser is to heat alkali metal vapor chamber by pumping light which is not absorbed by gain medium. Based on the three-level rate equation, a theoretical model of two-end pumped alkali metal laser with semiconductor laser is established, and the gain medium length is studied. The influence of the temperature of vapor chamber and the linewidth of pump source on the output laser of self-heating alkali metal laser in short vapor chamber. The results show that the output of the watt laser can be realized when the gain medium length is 2mm, and the output power of the self-heating alkali metal laser can be improved by selecting a higher pump power. The results will provide a theoretical basis for the experiments of self-heating alkali metal lasers and can further expand the application field of low-power alkali metal lasers.
【作者單位】： 中國科學院電子學研究所高功率氣體激光技術部;中國科學院大學;解放軍電子工程學院脈沖功率激光技術國家重點實驗室;
【基金】：國家自然科學基金(61505212) 脈沖功率激光技術重點實驗室基金(SKL2016KF02)
【分類號】：TN248.2
，

本文編號：1912202