本文選題：激光技術　切入點：穩定度　出處：《量子電子學報》2017年04期

【摘要】：設計了一套高穩定度大能量輸出的三波長Nd:YAG激光系統,用作激光清洗光源。該系統包括振蕩級、放大級及后續波長切換系統。為解決激光棒熱致雙折射效應造成的輸出能量下降和輸出不穩定,在輸出鏡和激光工作物質之間插入λ_(1/4)波片,并對波片的補償效果進行了研究。結果表明:插入波片后振蕩級輸出能量提高了10%,穩定度明顯提高。重復頻率為10 Hz時,1064 nm激光經放大后單脈沖能量可達700 mJ,其單次通過倍頻晶體BBO,得到532 nm激光的單脈沖能量為325.6 mJ,四倍頻后得到266 nm激光的單脈沖能量為84 mJ。1 h內測得的三波長激光輸出能量不穩定度均小于0.6%。
[Abstract]:A three wavelength Nd:YAG laser system with high stability and high energy output is designed, which can be used as laser cleaning light source.The system includes an oscillating stage, an amplifier stage and a subsequent wavelength switching system.In order to solve the problem of output energy decrease and output instability caused by thermal birefringence of laser rod, a 1 / 4) wave plate is inserted between the output mirror and the laser working material, and the compensation effect of the wave plate is studied.The results show that the output energy of the oscillating stage is increased by 10% and the stability is obviously improved.When the repetition rate is 10 Hz, the single pulse energy of 1064nm laser can reach 700mJ after amplification. The single pulse energy of 532nm laser is 325.6 MJ, and that of 266nm laser is 84 mJ.1 h.The instability of three wavelength laser output energy is less than 0.6.
【作者單位】： 中國科學院安徽光學精密機械研究所安徽光子器件與材料省級實驗室;中國科學院大學;中國科學技術大學;合肥師范學院;
【分類號】：TN249
，

本文編號：1692276