本文選題：FPGA　切入點：Modelsim　出處：《河北科技大學》2015年碩士論文

【摘要】：信道編碼是數據通信系統的重要組成部分,是將信息從信源端可靠地傳輸?shù)叫潘薅说闹饕夹g(shù)和方法。由于FPGA硬件設計的成熟、技術的發展,和其內部資源更加豐富,使得開發數字電路的成本逐步的降低,開發手段越來越多樣,使用方法越來越靈活,故在FPGA的平臺上實現信道編碼已經成為現實的需求。首先,搭建了系統平臺的總體結構框架,論證了采用FPGA平臺的必要性和可行性;然后,完成了使用Verilog語言編寫的FPGA程序;最后,搭建了FPGA的modelsim仿真平臺,在仿真平臺上驗證了程序的功能和時序邏輯。課題立足實際需求,參與設計并實現了一款基于FPGA的數據采集平臺,該平臺的主要功能為:接收中央處理模塊發送的采集信息數據,對數據進行編碼和調制,按照預先設定好的信道發送給衛星;接收中央處理模塊發送的配置參數信息;發送通信模塊自身的配置參數信息,根據要求發送返回給中央處理器模塊。該平臺主要布設在高山、海島等環境惡劣、人煙稀少等無人地區。針對無人值守的環境下,需要系統可以實現各種編碼結構之間的串行連接。課題主要研究如何在平臺上設計和實現信道編碼。在信道編碼的部分重點研究了BCH編碼、卷積編碼以及RS編碼,并使用MATLAB對設計的編碼邏輯進行了仿真,通過MATLAB的仿真驗證所編碼邏輯的正確性。
[Abstract]:Channel coding is an important part of data communication system. It is the main technology and method to transfer information reliably from the source to the receiver. Due to the maturity of FPGA hardware design, the development of technology, and the abundance of its internal resources, channel coding is the most important part of data communication system. The cost of developing digital circuits has been gradually reduced, the means of development have become more and more diverse, and the methods of use have become more and more flexible, so the implementation of channel coding on the platform of FPGA has become a real demand. The overall framework of the system platform is built, and the necessity and feasibility of using FPGA platform are demonstrated. Then, the FPGA program written in Verilog language is completed. Finally, the modelsim simulation platform of FPGA is built. The function and timing logic of the program are verified on the simulation platform. The subject is based on the actual demand and participates in the design and implementation of a data acquisition platform based on FPGA. The main functions of the platform are as follows: receiving the collected information data sent by the central processing module, encoding and modulating the data, sending the data to the satellite according to the pre-set channel, receiving the configuration parameter information sent by the central processing module; Send the configuration parameter information of the communication module itself and send it back to the central processor module according to the request. The platform is mainly arranged in the uninhabited areas such as mountains, islands, etc. It is necessary for the system to realize the serial connection between various coding structures. This paper mainly studies how to design and implement channel coding on the platform. In the part of channel coding, it focuses on BCH coding, convolutional coding and RS coding. The designed coding logic is simulated with MATLAB, and the correctness of the coded logic is verified by the simulation of MATLAB.
【學位授予單位】：河北科技大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN791;TN927.2

【參考文獻】

相關期刊論文 前10條

1 YAN Jian;CHEN Xiang;LIU Chunli;;Capacity Maximization Based Power Loading Analysis for Digital Channelized Satcom Systems[J];中國通信;2015年05期

2 尼古拉;;無所不有的電磁波[J];供用電;2015年03期

3 ZHENG KaiJing;WANG ChaoGang;XIAO Ming;CHEN Jun;LI JianCheng;HU ZhangLi;;Expression of bkt and bch genes from Haematococcus pluvialis in transgenic Chlamydomonas[J];Science China(Life Sciences);2014年10期

4 董磊;楊俊峰;宋克柱;;Carry-chain propagation delay impacts on resolution of FPGA-based TDC[J];Nuclear Science and Techniques;2014年03期

5 孫旭東;冷用斌;;Implementation and integration of a systematic DBPM calibration with PLL frequency synthesis and FPGA[J];Nuclear Science and Techniques;2014年02期

6 彭nο，

本文編號：1660415