發布時間：2018-02-24 23:17

  本文關鍵詞： whispering gallery mode wet etching quality factor　出處：《Chinese Physics B》2017年05期 　論文類型：期刊論文

【摘要】：Silica whispering gallery mode(WGM) microcavities were fabricated by the buffered oxide etcher and potassium hydroxide wet etching technique without any subsequent chemical or laser treatments. The silicon pedestal underneath was an octagonal pyramid, thus providing a pointed connection area with the top silica microdisk while weakly influencing the resonance modes. The sidewalls of our microdisks were wedge shaped, which was believed to be an advantage for the mode confinement. Efficient coupling from and to the 60 μm diameter microdisk structure was achieved using tapered optical fibres, exhibiting a quality factor of 1.5×10~4 near a wavelength of 1550 nm. Many resonance modes were observed, and double transverse electric modes were identified by theoretical calculations. The quality factor of the microdisks was also analysed to deduce the cavity roughness. The wet etching technique provides a more convenient avenue to fabricate WGM microdisks than conventional fabrication methods.
[Abstract]:Microcavities were fabricated by buffered oxide etcher and potassium hydroxide wet etching etching without without any any chemical or laser treatment s.#en21# silicon underneath was an octagonal pyramid, thus providing a pointed area area with with with area with area area with with area area with with area with area with area with area with weakly influencing influencing influencing the resonance resonance desdes.#en42# The The were were wedge shaped. which was was was to be a advantage advantage advantage for for for. Coupling from and to the 60 渭 m diameter microdisk structure was achieved using tapered optical fibres.#en12# a quality factor of 1.5 脳 104#en15# a wavelength of 1550nm. Many resonance modes were were were double double double electric were were identified by theoretical calculations. The quality factor of the the analysed to deduce the cavity roughness.#en40# wet etching etching etching #en47to fabricate WGM microdisks than conventional conventional conventional.
【作者單位】： Department
【基金】：Project supported by the Postdoctoral Science Foundation of China(Grant No.2015M582041) the Special Project on the Integration of Industry,Education and Research of Aviation Industry Corporation of China
【分類號】：TN305.7

【相似文獻】

相關期刊論文 前10條

1 吳建杰;李金洋;要彥清;祁志美;;Reactive ion etching of Ti-diffused LiNbO_3 slab waveguides[J];Journal of Semiconductors;2013年08期

2 ;Measurement of GaAs start duration in different solution concentration using infrared images[J];Chinese Science Bulletin;2008年06期

3 ;本期顯示術語——光刻(photo etching)[J];現代顯示;2008年05期

4 陳樂樂;朱亮;徐昕睿;李東霞;蔡輝;包大勇;;Role of CF_2 in the etching of SiO_2,Si_3N_4 and Si in fluorocarbon plasma[J];半導體學報;2009年03期

5 李巍巍;趙有文;董志遠;楊俊;胡煒杰;客建紅;;Wet etching and infrared absorption of AlN bulk single crystals[J];半導體學報;2009年07期

6 趙志剛;郭金川;雷耀虎;牛憨笨;;Photoelectrochemical etching of uniform macropore array on full 5-inch silicon wafers[J];半導體學報;2010年07期

7 王國政;付申成;陳立;王薊;秦旭磊;王洋;鄭仲馗;端木慶鐸;;Influence of voltage on photo-electrochemical etching of n-type macroporous silicon arrays[J];半導體學報;2010年11期

8 張徐;饒峰;劉波;彭程;周夕淋;姚棟寧;郭曉慧;宋三年;王良詠;成巖;吳良才;宋志棠;封松林;;Dry etching of new phase-change material Al_(1.3)Sb_3Te in CF_4/Ar plasma[J];半導體學報;2012年10期

9 ;Uniformity of Electrical Parameters on MCT Epitaxy Film[J];Semiconductor Photonics and Technology;2004年02期

10 高延軍;端木慶鐸;王國政;李野;田景全;;Formation of a silicon micropore array of a two-dimension electron multiplier by photo electrochemical etching[J];半導體學報;2009年02期

相關會議論文 前2條

1 ;A SYSTEMATIC STUDY OF RIE FOR SILICON TIPS[A];2006年中國機械工程學會年會暨中國工程院機械與運載工程學部首屆年會論文集[C];2006年

2 Hongjun Yang;Yixu Song;Shulin Zheng;Lihua Wang;Peifa Jia;;An Optimized-based Ion Etch Yield Modeling Method in Plasma Etching[A];第25屆中國控制與決策會議論文集[C];2013年

，

本文編號：1532114