本文關鍵詞：基于組合積分系統先進濾波算法理論研究與應用　出處：《東華大學》2015年碩士論文　論文類型：學位論文

  更多相關文章： 組合積分系統 數字濾波器 烘絲機 預測PI控制算法 LabWindows/CVI

【摘要】：組合積分系統多采用傳統方法進行控制，如PID控制、Smith預估控制、內�？刂�、模糊PID控制及抗時滯偽PI控制，，都取得不錯控制效果。雖然組合積分系統已在工業控制領域中廣泛存在，但至今尚未引起廣大工程技術人員關注，多數研究者們將關注點放在組合積分系統控制策略方面，其它應用研究較少。本文分析組合積分環節低通濾波實質，通過組合積分環節設計低通、高通、帶通濾波器。將組合積分濾波環節與預測PI控制算法應用到煙草含水率控制系統中，更好的實現對控制系統穩定性分析。從理論研究到工程實踐，可分為以下兩個部分： （1）低通、高通、帶通濾波器設計 基于組合積分環節低通濾波原理，提出采用組合積分環節與延時環節設計低通、高通、帶通濾波器的方法。確定濾波器參數選擇原則，并分析其相對于數字濾波器優點。 （2）組合積分環節與預測PI控制算法結合應用 煙草工藝過程中常存在周期性干擾，烘絲出口含水率僅能控制在±5%范圍內。將組合積分環節與預測PI控制算法結合在烘絲含水率控制過程中的應用表明：可以使出口含水率保證在±0.3%范圍內，保證出口含水率的穩定。對比控制系統前后超調量，突出該策略對控制系統穩定性分析的優勢。 采用LabWindows/CVI作為軟件開發平臺，開發通用的組合積分系統先進控制軟件。Simulink搭建組合積分系統過程控制模型，先進控制算法通過DDE通訊技術進行數據交換。該方法在不影響工業生產的同時，又能夠有效的對軟件的各項功能進行測試。
[Abstract]:The combined integral system is controlled by traditional methods, such as PID control Smith predictive control, internal model control, fuzzy PID control and anti-delay pseudo-Pi control. Although the combined integral system has been widely existed in the field of industrial control, it has not yet attracted the attention of the vast number of engineers and technicians. Most researchers focus on the control strategy of combinatorial integral system, but few other applications. This paper analyzes the essence of low-pass filtering in combinatorial integration, and designs low-pass and high-pass through combinatorial integration. Band-pass filter. The combined integral filter and predictive Pi control algorithm are applied to the tobacco moisture control system, and the stability of the control system is better analyzed, from theoretical research to engineering practice. It can be divided into two parts: Low pass, high pass, band pass filter design Based on the principle of low pass filter in combinatorial integral link, a method of designing low pass, high pass and band pass filter with combination integral link and delay link is put forward, and the selection principle of filter parameters is determined. The advantages of digital filter are analyzed. Application of combination integral link and predictive Pi control algorithm Periodic interference often exists in the process of tobacco processing. The moisture content at the outlet of dried silk can only be controlled in the range of 鹵5%. The application of combination integral link and predictive Pi control algorithm in the control process of moisture content of dried silk shows that:. The moisture content of the outlet can be guaranteed in the range of 鹵0.3%. The stability of water content at the outlet is guaranteed, and the advantages of the strategy in analyzing the stability of the control system are highlighted by comparing the overshoot of the control system before and after the control system. Using LabWindows/CVI as the software development platform, the general advanced control software. Simulink is developed to build the process control model of the integrated integration system. The advanced control algorithm uses DDE communication technology to exchange data, which can effectively test the functions of the software without affecting the industrial production.
【學位授予單位】：東華大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN713

【參考文獻】

相關期刊論文 前8條

1 趙娜;黃志利;徐寶連;楊楠;;數字濾波器不同實現結構下的有限字長效應分析[J];彈箭與制導學報;2008年03期

2 劉華昌;于成龍;冉漢政;;基于Matlab的直流局部放電檢測系統GUI界面設計[J];電氣技術;2008年07期

3 路林吉,謝萍;虛擬儀器講座 第六講 虛擬儀器的應用[J];電子技術;2000年06期

4 刁修民,王建;基于LabWindows/CVI的虛擬儀器軟件開發技術[J];國外電子測量技術;2003年S1期

5 張福波,張志偉,劉光軍;LabWindows/CVI環境下調用MATLAB函數的實現方法[J];機床與液壓;2004年08期

6 楊邵偉;韓天;尹忠俊;李偉;;MATLAB GUI界面設計在電機故障診斷中的應用[J];機電產品開發與創新;2007年06期

7 李興瑋,葉磊,黃柯棣;基于MATLAB/xPCTarget構建實時仿真系統[J];計算機仿真;2003年08期

8 任正云;鄭達;;流程工業的組合積分系統及其先進控制[J];控制理論與應用;2009年09期

相關博士學位論文 前1條

1 鄭達;組合積分系統的控制理論與應用研究[D];東華大學;2009年

本文編號：1425943